Display The Selected Input On The Hdmi Output - Crestron DM Lite HD(I)-MD Series Supplemental Manual

Configure the front panel in the Front Panel section of the Device page.
Device Page - Front Panel
To configure the front panel, do the following as required:
Configure Front Panel Lock to unlock or lock the front panel push buttons:
•
To disable locking of the push buttons and allow them to function, click the
-
Disabled radio button (default setting).
To enable locking of the push buttons excluding the SETUP push button, click
-
the Enabled radio button.
Configure Front Panel LEDs to enable or disable the LEDs:
•
To enable the LEDs to light as appropriate, click the Enabled radio button
-
(default setting).
To disable the LEDs excluding the SETUP LED, click the Enabled radio button.
-

Display the Selected Input on the HDMI Output

By default, the HDMI output is configured to display the name of the selected input
when inputs are switched. The input name is the name assigned in the web interface or
SIMPL Windows. The input name is displayed for 10 seconds in the upper-right corner of
the display.
Configure input notification in the On Screen Display section of the Device page.
Device Page - On Screen Display
To configure input notification, do either of the following:
To enable input notification on the HDMI output when inputs are switched, click
•
the Enabled radio button (default setting).
To disable input notification on the HDMI output when inputs are switched, click
•
the Disabled radio button.
Supplemental Guide – DOC. 7797D DM Lite HD(I)-MD Auto-Switchers and Extenders • 25