Configure Output Settings - Crestron DM Lite HD(I)-MD Series Supplemental Manual

c. (HD-MD-400-C-E only) In the TT-100 Support section of the page, select

Configure Output Settings

Configuration of output settings includes the enabling or disabling of the HDMI output,
the renaming of the output, setting the output resolution, and the enabling of HDCP. In
addition, automatic power settings and analog audio settings can be configured.
Information about the connected display and the output signal can also be viewed.
Configure output settings on the Output page of the web interface. To access the
Output page, click OUTPUT in the navigation bar.
Output Page
Supplemental Guide – DOC. 7797D
the TT-100 mode to determine how the HD-MD-400-C-E is to interpret
button presses on the connected Crestron Connect It™ cable caddy
(TT-100 Series):
Quick Selection: (Default setting) The HD-MD-400-C-E switches
•
among the active inputs each time a button on a cable caddy is
pressed while the button LED is green. The selected active input is
displayed on the output.
A button LED is green when an active input is routed and is blue when
no inputs are connected to the HD-MD-400-C-E.
Standard: Operates according to the SIMPL program (refer to the
•
SIMPL Windows help file for information)
DM Lite HD(I)-MD Auto-Switchers and Extenders • 15