Configure Hdmi Output Settings - Crestron DM Lite HD(I)-MD Series Supplemental Manual

Configure HDMI Output Settings

Configure HDMI output settings in the Output Settings section of the Output page.
Output Page - Output Settings
To configure HDMI output settings:
1. Enable or disable the HDMI output by clicking the Enable or Disable radio button,
respectively. By default, the Enable radio button is selected, allowing the output
display to turn on. If the Disable radio button is selected, the output display
turns off.
2. In the Name text entry box, rename the output if desired. The default name is
OUTPUT. To save the new name, click Save Name.
3. In the Resolution drop-down list, select the desired output resolution. A list of the
available selections follows.
NOTE:
Auto (Recommended)
640x480@60
480i
480p
576i
576p
720p@50
720p@60
800x600@60
840x480@60
1024x768@60
1280x768@60
1280x768@60 RB
1280x800@60
1280x800@60 RB
1280x960@60
1280x1024@60
The default setting is Auto (Recommended), which specifies the preferred
resolution of the connected display.
16 • DM Lite HD(I)-MD Auto-Switchers and Extenders
RB
In the following list,
Reduced Blanking
denotes
1360x768@60
1366x768@60
1366x768@60 RB
1400x1050@60
1400x1050@60 RB
1440x900@60
1440x900@60 RB
1600x900@60 RB
1600x1200@60
1680x1050@60
1680x1050@60 RB
1080i50
1080i60
1080p50
1080p60
1900x1200@60 RB
1080p30
Supplemental Guide – DOC. 7797D
.