Operating Data; I/O Modules - Viessmann Vitoflex 300-UF Series Installation And Operating Instructions Manual

Vitoflex 300-UF Installation & Operating

Operating Data

I/O Modules

Legend
A Designation of the input and output module in
the controller
B Displays the function of the inputs and outputs
Tap the display to switch to the next screen.
C Designation of the input and output
D The status display is illuminated if the input and
output are active.
Tap the following keys:
1. "Menu"
2. "Operating data"
This is where operating data such as hours run are displayed.
Parameter Description
"Hours run, load" Displays the number of hours run
in the "Load" operating state.
"Hours run, Displays the number of hours run
firebed maintenance" in the "Firebed maintenance"
operating state.
"Hours run, standby" Displays the number of hours run
in the "Standby" operating state.
"Hours run, boiler 2" Displays the number of hours run
by boiler 2 (external heat
generator).
Tap the following keys:
1. "Menu"
2. "I/O modules"
Note: The I/O modules screen is a display-only screen
and is used for checking and troubleshooting inputs
and outputs.
Operation
67