Charts - Viessmann Vitoflex 300-UF Series Installation And Operating Instructions Manual

Vitoflex 300-UF Installation & Operating

Charts

The charts screen has 5 chart templates.
Chart representation
The actual values are stored in a 30 minute ring buffer.
For this, values are recorded every 10 seconds.
You can display up to 4 freely selectable variables per chart.
Tap the following keys:
1. "Menu"
2. "Charts"
3. Select a chart representation. For this, tap a chart symbol.
Legend
A Overview of displayed variables
Gives the values for the current cursor position.
Tap in this area to display the chart settings screen,
see page 60.
Legend
B Chart with the selected variables
Tap the chart to zoom into the time axis.
C Zoom
Shows the time axis in a higher resolution
in the chart.
Sets the time range to 30 minutes.
Shows a greater time range.
D Current cursor position
Moves the cursor to the left.
Moves the cursor to the right.
Positions the cursor on the current time point.
E To move the time axis
Skips to the beginning.
Jumps back one screen.
Jumps forward one screen.
Skips to the end.
Additional Settings
59