VIDEO
1
VIDEO
20°C
1
VIDEO
20°C
AUDIO
1
AUDIO
20°C
VIDEO mode
Press the mode button on the side of the parent unit to select the VIDEO
mode.
When the VIDEO mode is activated, the screen is always on, so you can see
your baby. All sounds are directly transmitted to the parent unit.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
AUDIO mode
1 Press the mode button on the side of the parent unit to switch to AUDIO
mode.
When the AUDIO mode is activated, the display of the parent unit
switches off. After 3 seconds the display will completely turn off and the
status bar will disappear.
Note: The status bar is not visible when the display is off.
13
English