Check Tire Pressure; Mower Assembly; Check Torque - Mower Blades - Briggs & Stratton Ferris IS5100Z Series Dealer Setup & Adjustment Instructions Manual

33 hp diesel 61" icd mower deck
Table of Contents

Advertisement

IS5100Z Series - 33 HP Diesel
61" iCD Mower Deck
Check Tire Pressures
Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. Note
that these pressures may differ slightly from the "Max
Inflation" stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.
Tire
Front
Rear
Mower
Assembly

Check Torque - Mower Blades

WARNING
Mower blades are sharp. For your personal
safety, do not handle mower blades with bare
hands. Careless or improper handling of blades
may result in serious injury. Blade mounting
bolts must each be installed with a flat washer
then securely tightened. Torque blade mounting
bolts to 70 ft.lbs. (94 N.m.)
1. Check that blades are installed with the tabs pointing
up toward deck as shown in Figure 16. Torque bolts
to 70 ft.lbs. (94 N.m.).
Pressure
25 psi (1,72 bar)
18 psi (1,24 bar)
Figure 15. Checking Tire Pressure
Figure 16. Check Blade Torque
8

Advertisement

Table of Contents
loading

Table of Contents