Check Fluid Levels; Fill And Check Engine Oil; Reduce And Check Tire Pressure - Briggs & Stratton Axion 150Z Series Setup Instructions

Axion / 150Z Series
Check
Fluid Levels
Fill & Check Engine Oil
Removing the rear cover to gain access to the
engine, use the dipstick (Figure 11) to check the
engine oil level. If necessary add engine oil. Check
engine manufacturer's owner's manual for oil
recommendations.
Figure 11. Checking the fluid levels
Reduce & Check Tire
Pressures
The tires are over-inflated for shipping purposes. Inflate
to the pressures shown (Figure 12). Note that these
pressures may differ slightly from the "Max Inflation"
stamped on the side-wall of the tires. The pressures
shown provide proper traction, improve cut quality, and
extend tire life.
Figure 12. Checking the tire pressure
Size
Front
Rear
PSI bar
18-20 1,24-1,38
10-12 ,69-,83
10