IBM Flex System EN4023 User Manual page 37

5. Select the IPv4 tab.
6. Complete the text fields as required, then click Apply.
7.
FIGURE 16
For IPv6
1. Install the IBM Flex System EN4023 10Gb Scalable Switch in the appropriate bay of the IBM
2. Log in to the CMM using the following default user name and password settings:
3. From the CMM GUI, navigate to Chassis Management > Component IP Configuration.
4. Select the I/O Module bay in which the switch is installed. The example in
5. Select the IPv6 tab.
6. Complete the text fields as required, then click Apply.
7.
Introduction
Click Close to close the dialog box.
Component IP Configuration page
Flex System chassis. For more information, see
User ID: USERID
Password: PASSW0RD (wherein the sixth character is a zero)
"IO Module 3."
The IP Address Configuration IO Module (for the selected bay) dialog box displays.
Click Close to close the dialog box.
Configuring the switch
"Installing the switch" on page 11.
2
Figure 17 is using
27