Yamaha RX-V4600 Owner's Manual page 63

■ Parametric EQ (Parametric equalizer)
Use this feature to adjust the parametric equalizer for any
speaker.
Manual Setup > Sound > Parametric EQ >
LFE Level
Dynamic Range
Parametric EQ
Tone Control
Audio Option
1
Press k / n to select Test Tone or the speaker
you want to adjust.
• Test Tone turns on or off the test tone output
when adjusting the tonal quality of each speaker.
• Front L adjusts the tonal quality of the front left
speaker.
• Front R adjusts the tonal quality of the front right
speaker.
• Center adjusts the tonal quality of the center
speaker.
• Surround L adjusts the tonal quality of the
surround left speaker.
• Surround R adjusts the tonal quality of the
surround right speaker.
• Surround Back L adjusts the tonal quality of the
surround back left speaker.
• Surround Back R adjusts the tonal quality of the
surround back right speaker.
• Presence L adjusts the tonal quality of the
presence left speaker.
• Presence R adjusts the tonal quality of the
presence right speaker.
2
Press h to access the settings window.
Test Tone
Front L
Front R
Center
3
Press l / h to select PARAM, then press
ENTER to select a parameter from Band
(band), Freq. (frequency) or Q (Q factor).
Test Tone
Front L
Front R
PARAM RESET
EDIT EXIT
Band / Gain
4
Press n to select EDIT and press ENTER to
access the edit window.
Test Tone
Front L
Front R
Center
The parameter selected in PARAM is highlighted.
• Press l / h to adjust the parameter.
• Press k / n to adjust the Gain.
• Press ENTER to exit the edit window.
5
Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all PEQ parameter settings for the
selected speaker, select RESET and press ENTER.
6
Select EXIT and press ENTER to exit the
settings window.
y
• If you select "Band" in step 3, you can use this menu as a
graphic equalizer.
• For more information on the parametric equalizer, see
"PARAMETRIC EQUALIZER INFORMATION" on page 114.
SYSTEM OPTIONS
Band #1
Gain 0.0dB
Freq. 125.0Hz
Q 1.000
59