Yamaha RX-V4600 Owner's Manual page 12

CONTROLS AND FUNCTIONS
B MACRO
Use to program a series of operations for control by a
single button (see page 76).
C STANDBY
Sets this unit in the standby mode.
D SYSTEM POWER
Turns on the power of this unit.
E AUDIO SELECT
Toggles the priority for the type of audio input jack
(AUTO, i.LINK, HDMI, COAX/OPT, ANALOG) when
one component is connected to two or more input jacks on
this unit (see page 40).
F SLEEP
Sets the sleep timer.
G MULTI CH IN
Selects MULTI CH INPUT when using an external
decoder (etc.).
H SELECT k / n
Selects another component that you can control
independently of the input component selected with the
input selector buttons.
I VOL +/–
Increases or decreases the volume level.
J AMP/SOURCE/TV
Selects the component you want to control with the
remote control.
AMP: Set to this position to operate this unit.
SOURCE: Set to this position to operate the component
selected with an input selector button.
TV: Set to this position to operate the television.
To set the remote control codes for components, see
page 71.
K MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
L PURE DIRECT
Turns on or off PURE DIRECT mode (see page 38).
M EXIT, PRG SELECT
Use to exit the graphical user interface (GUI) mode when
AMP/SOURCE/TV is set to AMP.
(U.S.A. model only)
Selects the HD Radio audio program when
AMP/SOURCE/TV is set to SOURCE and the unit is in
the tuner mode (see page 46).
N NIGHT
Turns on or off the night listening modes (see page 38).
8
O DISPLAY
Use to enter into the front panel display menu mode when
AMP/SOURCE/TV is set to AMP.
(U.S.A. model only)
Toggles between HD Radio information displays when
AMP/SOURCE/TV is set to SOURCE and the unit is in
the tuner mode (see page 46).
P STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
Q SPEAKERS A/B
Use to turn on or off the set of front speakers connected to
the A and/or B terminals on the rear panel when
AMP/SOURCE/TV is set to AMP, then the corresponding
button is pressed each time.
R RE-NAME
Used to change the input source name in the display
window (see page 75).
S CLEAR
Used to clear functions acquired when using the learn,
macro and rename features, or setting remote control
codes (see page 78).
T LEARN
Used to set up the remote control code or program
functions from other remote controls (see page 73).