Yamaha RX-V4600 Owner's Manual page 41

Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select decoders (PL xMovie,
PL xMusic, EX/ES or EX) manually.
• 6.1/7.1-channel playback is not possible even if EXTD SUR. is
pressed in the following cases:
– When Surround or Surround Back is set to "None"
(see page 63).
– When the source connected to the MULTI CH INPUT jack is
being played.
– When the source being played does not contain surround L/R
channel signals.
– When a Dolby Digital KARAOKE source is being played.
– When 2ch Stereo, 7ch Stereo or PURE DIRECT is selected.
• When the power of this unit is turned off, the input mode will be
reset to AUTO.
• The Pro Logic x decoder is not available when Surround Back
is set to "None" (see page 63).
• "PL xMovie" cannot be selected when Surround Back is set to
"Large x1" or "Small x1" (see page 63).
■ Enjoying 2-channel software in surround
Signals input from 2-channel sources can also be played
back on multiple channels.
Set AMP/SOURCE/TV to AMP, then press
STANDARD on the remote control to switch
between the SUR. STANDARD and SUR.
ENHANCED programs.
STANDARD
6
Or press MOVIE or THX on the remote control to
select the MOVIE THEATER or THX programs.
MOVIE
4
Press SELECT on the remote control to select
the decoder.
SELECT
7
You can select from the following modes depending on
the type of software you are playing and your personal
preference.
THX
5
or
When you select the SUR. STANDARD program
<PRO LOGIC>
Dolby Pro Logic processing for any sources.
<PL x Movie> I I
Dolby Pro Logic x processing for movie software.
<PL x Music>
I I
Dolby Pro Logic x processing for music software.
<PL x Game>
I I
Dolby Pro Logic x processing for game software.
<Neo:6 Cinema>
DTS processing for movie software.
<Neo:6 Music>
DTS processing for music software.
<CS I I Cinema>*
SRS Circle Surround processing for movie software.
<CS I I Music>*
SRS Circle Surround processing for music software.
* (U.S.A. model only)
When you select the SUR. ENHANCED, MOVIE
THEATER or THX programs
<PRO LOGIC>
Dolby Pro Logic processing for any sources.
<PL x Movie>
I I
Dolby Pro Logic x processing for movie software.
<Neo:6 Cinema>
DTS processing for movie software.
y
• You can also select a decoder with the Decode Type parameter
in the Stereo/Surround menu (see page 99).
• You can also select a decoder by pressing l / h on the remote
control when the decoder type is displayed in the short message
display.
Note
The Pro Logic x decoder is not available when Surround Back is
set to "None" (see page 63).
PLAYBACK
37