Table of Contents
Advertisement
Verify Check Digit
Transmit Check Digit
Support Full ASCII
Length option
CODE 93
Code 93
Code 93
Length option
CODE 128
Code 128
Code 128
GS1-128
GS1-128
Separator Character
Selects whether to verify the Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data to
transmit.
"Verify Check Digit" must be enabled.
Selects whether to enable Code 39 Full ASCII decoding.
Characters are paired to encode the full ASCII character
set.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 93 decoding.
Sets the length of the Code 93 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 128 decoding.
Switch to enable GS1-128 decoding.
Enable the function code character separator, which is
used to separate data fields of variable length and
application identifiers of subsequent data fields in
concatenated data strings. Choose your input method
from drop-list: Keyboard input, Keyboard input
(Hexadecimal) or Symbol table input to set a
separator character to replace with.
BHT-1600 Handy Terminal User Manual
152
Enable
Disable
Disable
Max
/
Min
Length
(4-55)
Enable
Enable
Max
/
Min
Length
(4-55)
Enable
Enable
Enable
Enable
None
Advertisement
Table of Contents
