Denso BHT-1600 User Manual page 121

PAIR WITH NFC ENABLED BLUETOOTH DEVICES
1) On the device you would like to pair with, make sure NFC is enabled and Bluetooth
discovery is enabled.
2) Hold the handy terminal without covering the antenna area at the lower end of the
battery cover.
3) Move the handy terminal in proximity with the device. A screen notification will appear
to indicate that pairing is successful.
SHARE INFORMATION
1) Open the web page, video, photo or contact info page you would like to transfer.
2) Place the back of the handy terminal in close proximity with the other device you would
like to share data with.
3) When the two devices connect, a "Touch to beam" notification will appear on the
screen.
4) Touch the screen to initiate data transfer.
Note:
Once the data begins to transfer, the two devices only need to be held within a 10 m (32.8
ft.) range; they no longer have to be held within close range in order to transfer
successfully.
COMMUNICATION WITH NFC
1) On the handy terminal, launch an NFC enabled application.
2) Hold the handy terminal without covering the antenna area at the lower end of the
battery cover.
3) Place the handy terminal close to the NFC tag or device until the application indicates
data transfer is complete.
BHT-1600 Handy Terminal User Manual
109