Denso BHT-1600 User Manual page 163

Transmit Check Digit
CODE 11
Code 11
Code 11
Check Digit Option
Transmit Check Digit
Length option
CODE 39
Code 39
Code 39
Trioptic Code 39
Convert to Code 32
Code 32 Prefix
Decide whether to include the check digit in the data to
transmit.
"Verify Check Digit" must be enabled.
Switch to enable Code 11 decoding.
Sets whether to verify check digits according to the
selected option. If the check digits are incorrect, the
barcode will not be accepted.

Disable
 One Check Digit
 Two Check Digits
Selects whether to include check digits in the transmitted
data.

"Check Digit Option" must be enabled.
Sets the length of the Code 11 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Switch to enable Code 39 decoding.
Selects whether to decode Trioptic Code 39.
 Trioptic Code 39 is a variant of Code 39 used in the
marking of computer tape cartridges. It always
contains six characters.
Selects whether to convert decoded data to Italian
Pharmacode.
Prefix character "A" to Code 32 barcodes.
 "Convert to Code 32" must be enabled for this to
function properly.
BHT-1600 Handy Terminal User Manual
151
Enable
Disable
Disable
Disable
Disable
Max / Min
Length
(4-55)
Enable
Enable
Disable
Disable
Disable