Denso BHT-1600 User Manual page 139

DATA OUTPUT
Data Output allows users to set the way to output decoded data.
To open Data Output settings page:
1) Open Reader Config as described in
2) Tap Data Output.
WHERE TO OUTPUT
Keyboard Emulation setting controls where the decoded data is to be output.
Setting
Keyboard Emulation
of the same barcode in order to count as a valid read.
Configurable between 2 and 30.
Descriptions
Tap the switch to enable. When enabled, the reader

module treats decoded data as typed text and
outputs it to the active application on the handy
terminal. Options are:
None

InputMethod

KeyEvent

BHT-1600 Handy Terminal User Manual
Launch Reader Config.
127
Default
 Input
Meth
od