Manually Add Wi-Fi Network - Denso BHT-1600 User Manual

4.2.2. MANUALLY ADD WI-FI NETWORK

If the network you would like to connect to does not broadcast its SSID, or if the network is
out of range, you may add it manually.
1) Tap All Apps
2) Tap the Wi-Fi switch to enable this function, and then tap More
network".
3) In the dialog box, enter the name of the network in the Network name field, and select
a security method in the Security field (None, WEP, WPA/WPA2 PSK, 802.1x EAP).
For WEP/WPA/WPA2 PSK connections: Enter the required password and tap Save.

For 802.1x EAP connections: Tap Advanced options and select the EAP method in

the drop-down box (PEAP, TLS, TTLS, PWD, SIM, AKA), and the Phase 2
authentication in the drop-down box (None, MSCHAPV2, GTC). Select a CA
certificate and User certificate if required (certificates may be installed under
All Apps
OR All Apps
Certificates.) Enter your username in the Identity box and the password in the
Password box if required.
The handy terminal supports the following certificate file extensions:
File Extension Type
Description
How to install
4) If necessary, select the Proxy server and IPv4 settings. By default, no proxy is set and
IP settings are set to DHCP.
| Settings | Wi-Fi
| Settings | Security | Install from SD card
| Settings
Standard Certificate
DER-encoded X.509
certificates saved in
.crt or .cer files.
change the extension to
.crt or .cer.
BHT-1600 Handy Terminal User Manual
.
| Wi-Fi | More
X.509 certificates saved in PKCS#12
key store files with a .p12 or .pfx
extension.
Change the extension to
.p12 or .pfx.
100
and select "Add
| Advanced | Install
Key Stored