Table of Contents
Advertisement
2D IMAGER SETTINGS
Setting
Decode Timeout
Redundancy Level
Security Level
Scan Mode
Presentation
Usage
Time
Decoding
Illumination
Decode
Aiming
Pattern
Picklist Mode
Display Mode
Inverse Type
Addon Redundancy
Description
Sets the maximum time for the decoding process during a scan.
Configurable between 1 sec to 9 sec.
Sets how many successful readings should be done before
linear barcodes such as Codabar, MSI, and Interleaved 2 of 5
can be decoded. Levels 1 to 4 available.
Sets the security level to ensure decoding accuracy considering
the printed quality of barcodes such as Code 128, Code 93, and
UPC/EAN. The higher the level is, the more security is ensured.
Options are:
Level
Description
0
With this default, the scan engine is aggressive
enough to decode most "in-spec" barcodes.
1
Select this level if misdecodes have occurred. It
fixes most misdecodes.
2
Select this level if Level 1 should fail to eliminate
misdecodes.
3
Select this level if Security Level 2 should fail to
prevent misdecodes. However, as this level actually
impairs the decoding ability of the decoder, a safer
solution would be to improve the quality of the bar
codes to read.
Sets the reader's scanning behavior.
Level: The decoding process is activated by a trigger event,
and continues until the trigger event ends, a valid decode
happens or decode session time-out is reached.
Presentation Mode: When this device is executing Barcode
reader service under this mode, the reader module will stay
active and automatically turn off after the user-defined
period of time (Presentation Usage Time).
This option is available when Presentation is selected as the
scan mode. This defines the duration of how long Presentation
mode stays active, after which the laser light beam will
automatically be disabled.
Enables an LED light beam to aid barcode reading.
Projects a crosshair at the center of the laser light beam to
facilitate barcode reading.
When selected, only barcodes aligned at the crosshair of the
laser light beam will be decoded.
Enable
improved
performance
electronic displays and mobile phones.
Decide whether to disable or enable decoding inverse barcodes,
or set as auto.
Functions when "auto-discriminate" is applied for UPC/EAN
addons. Decides the number of times of supplemental decoding
BHT-1600 Handy Terminal User Manual
for reading
126
Default
5 sec.
Level 1
Level 0
Level
15 Minutes
Selected
(Enabled)
Selected
(Enabled)
Deselected
(Disabled)
barcodes
on
Deselected
(Disabled)
Regular
only
10
Advertisement
Table of Contents
