Denso BHT-1600 User Manual page 141

ENABLE READER
Features a switch to enable or disable reader scanning ability. When enabled, a light beam
will be sent out from the scanning window each time the trigger (scan key) is pressed.
NOTIFICATION SETTINGS
Notification Settings enables audible, visible and tactile feedback for scanning good read,
which helps notify the user of a successful decoding.
To open Notification Settings page:
1) Open Reader Config as described in
2) Tap Notification Settings.
Setting
Enable LED when
LED
good read
Vibrate when good
Vibrator
read
Beep when
Beeper
read
Launch Reader
Selects to enable/disable LED light (left) for
scanning good read. See
Enables/disables tactile feedback (vibration) for
good read and sets the duration to vibrate.
Sets the beeper sound for scanning good read.
good
Users can choose to mute the beeper sound, or
configure the beeper between sounds 1 to 9.
BHT-1600 Handy Terminal User Manual
Config.
Description
Status LED
129
Default
Selected
for details. (Enabled)
0 second
(Disabled)
Sound 1