Yamaha RX V565 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX V565
  6. Owner's manual

Yamaha RX V565 Owner's Manual

Av receiver
Hide thumbs Also See for RX V565:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
U
RX-V565
AV Receiver
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX V565

Summary of Contents for Yamaha RX V565

  • Page 1 RX-V565 AV Receiver OWNER’S MANUAL...

  • Page 3: Important Safety Instructions

    This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Table Of Contents

    Information on jacks and cable plugs ... 13 Connecting a TV monitor or projector ... 14 Connecting other components ... 15 Connecting a Yamaha iPod universal dock or Bluetooth™ wireless audio receiver... 16 Using the VIDEO AUX jacks on the front panel ... 16 Connecting the FM and AM antennas ...

  • Page 6: Introduction

    • Analog video input up-scaling for HDMI digital video output 480i or 480p → 720p, 1080i or 1080p ■ DOCK terminal • DOCK terminal to connect a Yamaha iPod universal dock (such as YDS-11, sold separately) or Bluetooth wireless audio receiver (such as YBA-10, sold separately) ■...

  • Page 7: About This Manual

    “HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. x.v.Color™ “x.v.Color” is a trademark of Sony Corporation. “SILENT CINEMA” is a trademark of Yamaha Corporation. “SILENT CINEMA” is a trademark of Yamaha Corporation. Supplied accessories...

  • Page 8: Part Names And Functions

    Front panel HDMI THROUGH INFO PHONES STANDBY SILENT CINEMA STANDBY/ON Switches this unit between standby and on (see page 17). PHONES jack For plugging headphones (see page 22). INFO Changes information display screens on the front panel display (see page 23). MEMORY Registers FM/AM stations as preset stations (see page 29).

  • Page 9: Rear Panel

    AV 3 AV 4 AV 5 AV 6 DOCK terminal For connecting an optional Yamaha iPod universal dock (YDS- 11) or Bluetooth wireless audio receiver (YBA-10) (see page 16). HDMI OUT/HDMI 1-4 For connecting an HDMI-compatible video monitor or external components for HDMI inputs 1-4 (see page 15).

  • Page 10: Front Panel Display

    Part names and functions Front panel display HDMI indicator Lights up during normal communication when HDMI is selected as an input source. CINEMA DSP indicator Lights up when a sound field program that uses CINEMA DSP is selected. Tuner indicator Lights up while receiving a radio broadcast signal from an FM/ AM station (see page 28).

  • Page 11: Remote Control

    Adjust the volume of this unit (see page 21). DISPLAY Changes the operation mode of the iPod connected to the Yamaha iPod universal dock (see page 30). MUTE Turns the mute function of the sound output on and off (see page 22).

  • Page 12: Quick Start Guide

    Place your speakers in the room and connect them to this unit. • Placing speakers • Connecting speakers • This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer) that automatically optimizes this unit based on room acoustic Subwoofer characteristics (audio characteristics of the speakers, speaker positions, and room acoustics, etc.).

  • Page 13: Preparation

    PREPARATION Preparing remote control Installing batteries in the remote control Take off the battery compartment cover. Insert the two supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment. Snap the battery compartment cover back into place.

  • Page 14: Connections

    (LFE) sounds included in Dolby Digital and DTS signals. Use a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System. Place it exterior to the front left and right speakers facing slightly inward to reduce reflections...

  • Page 15: Connecting Speakers

    Connecting speakers When you connect speakers, connect them to the respective terminals as follows, according to your speaker layout. SPEAKERS DMI 3 HDMI 4 FRONT CENTER SURROUND SURROUND AUDIO ■ 7.1-channel Speakers a Front speaker L b Front speaker R c Center speaker d Surround speaker L e Surround speaker R...

  • Page 16: Connecting The Speaker Cable

    Connections Connecting the speaker cable Caution • A speaker cable is a pair of insulated cables running side by side in general. One of the cables is colored differently or striped to indicate a polarity. Connect one end of the colored/striped cable to the “+” (red) terminal of this unit and the other end to that of your speaker, and connect one end of the other cable to the “–”...

  • Page 17: Information On Jacks And Cable Plugs

    Information on jacks and cable plugs This unit has the following input and output jacks. Use jacks and cables appropriate for components that you are connecting. ■ Audio jacks Jack and cables Description AUDIO jacks To transmit conventional analog left and right audio signals. Use (white) stereo pin cables.

  • Page 18: Connecting A Tv Monitor Or Projector

    Connections Connecting a TV monitor or projector Connect a video monitor such as a TV or projector to an output terminal of this unit. You can select one of the following three types according to the input signal format supported by the video monitor. Note •...

  • Page 19: Connecting Other Components

    Composite output • Input sources in parentheses are recommended to connect to the respective jacks. If your Yamaha component has the Remote in/out terminal, you can switch the input source to that component with a single key operation using the SCENE function (see page 21).

  • Page 20: Connecting A Yamaha Ipod Universal Dock Or Bluetooth™ Wireless Audio Receiver

    Bluetooth™ wireless audio receiver This unit has the DOCK jack, to which you can connect a Yamaha iPod universal dock (YDS-11, sold separately) or a Bluetooth wireless audio receiver (YBA-10, sold separately). You can play an iPod or a Bluetooth component with this unit by connecting it to the DOCK jack.

  • Page 21: Connecting The Fm And Am Antennas

    • Position the AM loop antenna away from this unit. • If you cannot get good reception, we recommend that you use an outdoor antenna. For more details, consult the nearest authorized Yamaha dealer or service center. • Always use the AM loop antenna even when the outdoor antenna is connected.

  • Page 22: Optimizing The Speaker Setting For Your Listening Room (Ypao)

    Optimizing the speaker setting for your listening room (YPAO) This unit has a Yamaha Parametric Acoustic Optimizer (YPAO). With the YPAO, this unit automatically adjusts the output characteristics of your speakers based on speaker position, speaker performance, and the acoustic characteristics of the room.
  • Page 23 Flat This adjusts each speaker to obtain the same characteristics. Select this if your speakers have similar qualities. Front This adjusts each speaker to obtain the same characteristics as the front left and right speakers. Select this if your front left and right speakers have significantly better qualities than the other speakers.

  • Page 24: When An Error Message Is Displayed During Measurement

    Optimizing the speaker setting for your listening room (YPAO) When an error message is displayed during measurement Select “Retry” or “Exit” using nCursor l / h and then press nENTER. ERROR E-9:USER CANCEL Don't operate any function >Retry Exit [ ]/[ ]:Select [ENTER]:Return Retry Performs “Auto Setup”...

  • Page 25: Basic Operation

    BASIC OPERATION Basic procedure Turn on external components (TV, DVD player, etc.) connected to this unit. Press NINPUT l / h (or gInput selection keys) to select an input source. The name of the selected input source is displayed for a few seconds.

  • Page 26: Muting Audio Output Temporarily (Mute)

    Playback Press gInput selection keys on the remote control for the input source whose remote control code was registered in step 1 for about 3 seconds while pressing down kSCENE key whose assignment you want to change. The external component can now be controlled remotely just by selecting a scene.

  • Page 27: Displaying Input Signal Information

    Displaying input signal information When HDMI1-4 or AV1-4 is selected as the input source, you can display audio/video signal information. • Input signal information is displayed on both a video monitor and the front panel display. • Information on the input signal is also displayed on the front panel display.

  • Page 28: Enjoy The Sound Field Programs

    Enjoy the sound field programs This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel sounds for almost all input sources using various sound field programs stored on the chip and a variety of surround decoders.
  • Page 29 Program Drama This sound field features stable reverberations that match a wide range of movie genres from serious dramas to musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones and background music softly but cubically around clear words and center positioning in a way that does not fatigue the listener even after long hours of viewing.
  • Page 30 Enjoy the sound field programs For Multi-channel stereo reproduction Program 7ch Stereo Use this program to output sound from all speakers. When you play back multi-channel sources, this unit downmixes the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties, etc.

  • Page 31: Enjoying Unprocessed Input Sources (Straight Decoding Mode)

    Enjoying unprocessed input sources (Straight decoding mode) In straight decoding mode, sounds are reproduced without sound field effect. 2-channel stereo sources are output from only the front left and right speakers. Multi-channel input sources are decoded straight into the appropriate channels and multi-channel sounds are reproduced without a sound field effect.

  • Page 32: Fm/Am Tuning

    The FM/AM tuner of this unit provides the following two modes for tuning. ■ Frequency tuning mode (Auto tuning / Manual tuning) You can tune in to a desired FM/AM station by searching or specifying its frequency. ■ Preset tuning mode (Preset tuning) You can preset the frequencies of FM/AM stations by registering them to specific numbers, and later just select those numbers to tune in.
  • Page 33 During the automatic station preset, the upper area of the screen changes as follows: READY → SEARCH → MEMORY each time a station is registered. When registration is complete, “FINISH” appears and the option menu screen automatically reappears. When you press mOPTION on the remote control, the screen returns to the original state.

  • Page 34: Using Ipod

    • Some features may not be compatible depending on the model or the software version of your iPod. • Some features may not be available depending on the model of Yamaha iPod universal dock. The following sections describe the procedure when using the YDS-11.
  • Page 35 Press nCursor k / n / l / h to select a menu item and then nENTER to start playback. Menu items of “Music” Playlists, Artists, Albums, Songs, Genres, Composers • Playlists > Songs • Artists > Albums > Songs •...

  • Page 36: Using Bluetooth™ Components

    Using Bluetooth™ components You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component.

  • Page 37: Advanced Operation

    ADVANCED OPERATION Setting the option menu for each input source (OPTION menu) This unit has an OPTION menu of frequently used menu items for input sources compatible with this unit. The procedure for setting the OPTION menu items is described below. Select an input source using NINPUT l / h (gInput selection keys).
  • Page 38 Setting the option menu for each input source (OPTION menu) ■ Decoder Mode Input source: HDMI1-4, AV1-4 Auto*/DTS Choices: Selects DTS digital audio signals for reproduction. Auto Automatically selects audio input signals. Selects DTS signals only. Other input signals are not reproduced. ■...

  • Page 39: Auto Preset

    ■ Auto Preset Input source: TUNER Automatically detects radio stations in the FM frequency band and registers them as preset stations (see page 28). ■ Clear Preset Input source: TUNER Clears the preset stations (see page 29). ■ Shuffle Input source: iPod (DOCK) Off*/Songs/Albums Choices: Changes the shuffle playback style (see page 31).

  • Page 40: Editing Surround Decoders/Sound Field Programs

    Editing surround decoders/sound field programs Selecting a decoder used with a sound field program When using sound field programs for movies or TV programs (except for Mono Movie), you can select a surround decoder to be used with the sound field program after setting the parameters from the following decoders.

  • Page 41: Center Width

    Parameters only usable in certain sound field programs ■ 2ch Stereo only Direct Auto*/Off Choices: Automatically bypasses the DSP circuit and tone control circuit when an analog sound source is selected as the input source. You can enjoy a higher quality sound. Auto Outputs sound by bypassing the DSP circuit and tone control circuit when the “Bass”...

  • Page 42: Operating Various Settings For This Unit (Setup Menu)

    Operating various settings for this unit (Setup menu) You can call the setup menu using the remote control and change the settings of various menus. You can change the following settings in the setup menu. For details, read “Basic operation of the setup menu” first, and see the respective pages.

  • Page 43: Basic Operation Of The Setup Menu

    Basic operation of the setup menu The setup menu screen appears on both video display (OSD) and front panel display. Video display (OSD) Setup Menu . ;Speaker Setup ;Sound Setup ;Function Setup ;DSP Parameter ;Memory Guard [ ]/[ ]:Up/Down [ENTER]:Enter Front panel display ;Speaker Setup In this section, procedures of setting menus using the...
  • Page 44 Operating various settings for this unit (Setup menu) LFE channel signals Front Parameter Subwoofer speakers Both Output Not output SWFR Output Not output Front Not output Output Low-frequency components of other channel signals Front Parameter Subwoofer speakers Both SWFR Front Not output Outputs low-frequency components of the front left and right channels and the channel of speaker, the size of which is set to...

  • Page 45: Sound Setup

    ■ B)Level Adjustable range: -10.0dB to +10.0dB (0.5 dB step) Defaults: “FR.L/FR.R/SWFR” 0dB* “CNTR/SUR.L/SUR.R/SBL/SBR” -1.0dB Separately adjusts volume of each speaker so that the sounds form speakers are at the same volume at the listening position. Items to be displayed vary depending on the number of speakers connected.

  • Page 46: Function Setup

    Operating various settings for this unit (Setup menu) Auto Delay Adjustable range: 0 to 240ms (1 ms step) Fine adjust the correction time when “HDMI Auto” is set to “On.” The actual correction time is displayed under in “Auto Delay” field and an offset time set by the user in “Offset”...

  • Page 47: Dsp Parameter

    ■ OSD Shift Adjustable range: -5 to 0* to +5 Adjusts top and bottom positions of the screen displayed on the video monitor. To move up the screen, set this value larger. To move down the screen, set it smaller. 3 Volume You can set items for volumes.

  • Page 48: Controlling Other Components With The Remote Control

    “List of remote control codes” at the end of this manual. ■ Default remote control code settings Input source Category Manufacturer [HDMI1] Blu-ray Disc Yamaha [HDMI2] — — [HDMI3] — — [HDMI4] — —...

  • Page 49: Advanced Setup

    Setting a remote control ID Two IDs are provided for the remote control of this unit. If another Yamaha amplifier is in the same room, setting a different remote control ID to this unit prevents unwanted operation of the other amplifier.

  • Page 50: Appendix

    Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General...
  • Page 51 Problem No picture. An appropriate video input is not selected on the monitor. The composite output terminals are used to output a component video signal, or the COMPONENT VIDEO jacks are used to output a composite video signal. This unit outputs the video signals are not supported on the video monitor connected to the HDMI OUT jack.
  • Page 52 Troubleshooting Problem No sound is heard “LFE/Bass Out” of “A)Config” in from the subwoofer. “Speaker Setup” of the setup menu (Speaker Setup→Manual Setup→A)Config) is set to “Front” when a Dolby Digital, DTS or AAC signal is being played. “LFE/Bass Out” of “A)Config” in “Speaker Setup”...

  • Page 53: Hdmi

    Problem The picture is The video software is copy-protected. disturbed. This unit suddenly The internal temperature becomes too enters the standby high and the overheat protection circuitry mode. has been activated. HDMI Problem No picture or sound. The number of the connected HDMI components is over the limit.

  • Page 54: Remote Control

    SETUP menu operation: press the key applicable for the current menu operation again. Cause Turn off this unit and reconnect the Yamaha iPod universal dock to the DOCK terminal of this unit. Remove your iPod in the Yamaha iPod universal dock and then place it back in the dock.

  • Page 55: Bluetooth

    • Warning message “W-2” or “W-3” indicates that the adjusted settings may not be optimal. • Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct. • If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center. Before Auto Setup...
  • Page 56 Check whether the microphone is properly placed. Check whether the speakers are properly placed and connected. The optimizer microphone or OPTIMIZER MIC jack may be defective. Contact the nearest Yamaha dealer or service center. Run “Auto Setup” again. Run “Auto Setup” again.

  • Page 57: Glossary

    ■ Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem and a capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustments, HDMI version 1.3 incorporates an automatic audio and video syncing capability that allows devices to perform this synchronization automatically and accurately without user interaction.

  • Page 58: Dts Digital Surround

    Glossary ■ Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals.

  • Page 59: Sound Field Program Information

    Based on a wealth of actually measured data, Yamaha CINEMA DSP provides the audiovisual experience of a movie theater in the listening room of your own home by using the Yamaha original sound field technology combined with various digital audio systems.

  • Page 60: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 Ω ... 90 W [Other models] 1 kHz, 0.9% THD, 6 Ω ... 90 W • Dynamic Power (IHF) [U.S.A.

  • Page 61: Index

    ■ Numerics 1 Dynamic Range, sound setup ...41 1 HDMI, function setup ...42 2 Display, function setup ...42 2 Lipsync, sound setup ...41 2ch Stereo, sound field program ...25 3 Volume, function setup ...43 4 Input Rename, function setup ...43 5.1-channel speaker layout ...10 6.1-channel speaker layout ...10 7.1-channel speaker layout ...10...
  • Page 62 Index Roleplaying Game, sound field program ... 25 ■ SB Level, sound field parameter ... 37 SCENE function ... 21 SCENE, front panel ... 4 SCENE, remote control ... 7 Sci-Fi, sound field program ... 24 Selecting SCENE ... 21 Setting remote control code ...

  • Page 63: List Of Remote Control Codes

    List of remote control codes Ausind Autovox A.R. Systems 0274 Acme 0260 Aventura Acura 0261, 0273 0259 Axion Admiral 0100, 0224, 0257, Baird 0258, 0259, 0264, Bang & Olufsen 0265 Basic Line Advent 0204 Adventura 0107 Bastide Adyson 0260, 0327, 0328 Baur Agashi 0327, 0328...
  • Page 64 Fujitsu Siemens 0425, 0426, 0427, Hinari 0428, 0429 Funai 0033, 0034, 0035, 0036, 0037, 0097, Hisawa 0104, 0105, 0225, Hisense 0259 Hitachi Futuretech 0104, 0225 Galaxi 0269, 0274 Galaxis 0243, 0274 Gateway 0163, 0226, 0227 0261, 0266, 0273 0069, 0071, 0072, 0073, 0077, 0090, 0099, 0102, 0106, 0112, 0131...
  • Page 65 Neckermann 0243, 0257, 0260, 0264, 0268, 0269, 0271, 0274, 0328 0268, 0271, 0274 Net-TV 0226 Neufunk 0273, 0274 New Tech 0261, 0268 New World 0262 NewTech 0273, 0274, 0328 Nicamagic 0260, 0327 Nikkai 0259, 0260, 0262, 0268, 0271, 0273, 0274, 0327, 0328 Nikko 0072, 0077, 0096 Nobliko...
  • Page 66 0272, 0274, 0335 Thorn 0271, 0274 0072, 0077, 0090 TNCi 0076 Wincom Tokai 0268, 0274, 0328 Xrypton Tokyo 0260, 0327 Yamaha Tomashi 0270 Toshiba 0027, 0043, 0053, 0054, 0061, 0062, 0063, 0064, 0065, Yamishi 0122, 0123, 0124, Yokan 0128, 0130, 0132, Yoko...
  • Page 67 Videon 1074 Videosonic 1020 Viewsonic 1066 Voodoo 1066 Wards 1020, 1021, 1022, 1023 Weltblick 1077 XR-1000 1022, 1023 Yamaha 1018, 1019 Yamishi 1079, 1090 Yokan 1079, 1090 Yoko 1076, 1077, 1079, 1090 Zenith 1032 ZT Group 1066 4Kus 2097 Accurian...
  • Page 68 ATACOM 2318 Enzer Audiovox 2111, 2199 Epson Avious 2317 2313 Finlux Axion 2171 Fintec Bang & Olufsen 2210 Fisher Baze 2317 Funai 2318 Gateway Bellagio 2313 Best Buy 2309 Gericom Blaupunkt 2209 Blue Parade 2207 Giec Boghe 2300 Global Solutions Brainwave 2312 Global Sphere 2305...
  • Page 69 Xlogic Sonic Blue 2215 Sontech 2316 Xoro Sony 2005, 2006, 2007, Yamada 2020, 2021, 2022, Yamaha 2023, 2024, 2025, 2069, 2072, 2073, 2085, 2086, 2087, 2091, 2092, 2093, Yamakawa 2102, 2128, 2129, Yukai 2130, 2249, 2250, Zenith 2323, 2334, 2335,...
  • Page 70 Viewmaster 3045 Condor Vision 3045 Connexions Visiopass 3051, 3054, 3055 Conrad Vortex View 3045 Wittenberg 3048 Conrad Electronic 4137, 4139 Zenith 3035, 3040, 3046 Contec Zentek 3044 Coolsat Cosat Sattelite Coship AB Sat 4138, 4139 Crown AccessHD 4058 Daeryung 4142 Daewoo 4138 Akai...
  • Page 71 4074, 4088, 4090, 4074, 4089, 4100 4131, 4133 4141 Zenith 4052, 4057, 4145 4102 Zodiac 4086 4086 4084 4090 Yamaha 5000, 5013 4094 CD Recoder 4071, 4072, 4073, 4092, 4103, 4116, Yamaha 5001 4117, 4134, 4135, 4136 4140 Yamaha 5002, 5003, 5004...
  • Page 72 © 2009 Yamaha Corporation All rights reserved. Printed in China WQ95460...

This manual is also suitable for:

Rx-v465

Table of Contents