Bowflex Treadmill 10 Assembly & Owners Manual page 21

11. Route the Console Cables and Attach the Console Assembly
NOTICE: Do not cut or crimp the Cables. Each Cable Connector has a corresponding end connector with that many openings. Be sure to fully
connect the cable connectors. * Hardware is not supplied on the Hardware Card.
#2
X4
*
*
a. Place the Console onto the Console Mast and route the Cables
through and out of the Console Mast
b. Fully pivot the Console Assembly downward and secure it to the
Console Mast.
Note: Do not crimp the Cables.
c. Connect the Cables.
21
Assembly / Owner's Manual
14