Macro Operations - Yamaha htr-5890 Owner's Manual

REMOTE CONTROL FEATURES

Macro operations

Macro buttons
TRANSMIT
SYSTEM
POWER POWER STANDBY POWER
TV AV
A B INPUT MODE SLEEP
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
MACRO ON/OFF
1
Set MACRO ON/OFF to ON.
2
Press a macro button.
Notes
• When you have finished using the Macro feature, set MACRO
ON/OFF to OFF.
• While the remote is carrying out a Macro program, it will not
accept any other button's function until the macro operation is
complete (the transmission indicator stops flashing).
• Continue to aim the remote control at the component the macro
is operating until the macro operation is complete.
72
FREQ/RDS EON MODE PTY SEEK START
REC
DISC SKIP
OFF ON MACRO LEARN CLEAR
RE–NAME
MACRO
Programming macro operations
You can program your own macros and use the macro
feature to transmit several remote control commands in
sequence at the press of a button. Be sure to set up remote
control codes or perform learning operations before
programming the macro. We do not recommend
programming continuous operations such as volume
control in a macro.
Notes
• The default macro is not cleared when a new macro is
programmed for a button. The default macro can be used again
when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default
macro. Programming a macro changes all macro contents.
1
Set AMP/SOURCE/TV to AMP or SOURCE.
AMP
SOURCE
TV
2
Press MACRO using a ballpoint pen or
similar object.
"MCR ?" appears in the display window.
MACRO
Note
If you do not complete each of the following steps within 30
seconds, the macro programming mode will be
automatically canceled. In this case, press MACRO again.
3
Press the macro button you want to use to
operate the macro.
The macro button name (ex. "M:DVD") and the
selected component name (ex. "DVD") appear
alternately in the display window.
A B INPUT MODE SLEEP
PHONO TUNER CD MULTI CH IN
V - AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
Note
"AGAIN" appears in the display window if you press a
button other than a macro button.