Yamaha HTR-5830 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. HTR-5830
  6. Owner's manual

Yamaha HTR-5830 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for HTR-5830:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
U
HTR-5830
AV Receiver
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha HTR-5830

Summary of Contents for Yamaha HTR-5830

  • Page 1 HTR-5830 AV Receiver OWNER’S MANUAL...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 This Class B digital apparatus complies with Canadian ICES-003. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

  • Page 5: Table Of Contents

    INTRODUCTION FEATURES ... 2 GETTING STARTED ... 3 Supplied accessories ... 3 Installing batteries in the remote control ... 3 CONTROLS AND FUNCTIONS ... 4 Front panel ... 4 Remote control ... 6 Front panel display ... 8 PREPARATION CONNECTIONS ... 9 Before connecting components ...

  • Page 6: Features

    In this case, the product has priority. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “SILENT CINEMA” is a trademark of YAMAHA CORPORATION. FEATURES Sound field features N Dolby Pro Logic/Dolby Pro Logic II decoder N Dolby Digital/Dolby Digital + Matrix 6.1 Decoder...

  • Page 7: Getting Started

    Supplied accessories Please check that you received all of the following parts. Remote control SYSTEM POWER POWER POWER STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX 6CH INPUT AUDIO DISC SKIP CODE SET VOLUME – – – MUTE INPUT MUTE HALL JAZZ ROCK ENTERTAINMENT...

  • Page 8: Controls And Functions

    CONTROLS AND FUNCTIONS Front panel STANDBY PHONES SPEAKERS A/B/OFF SILENT CINEMA 1 STANDBY/ON Turns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.
  • Page 9 CONTROLS AND FUNCTIONS 0 VOLUME Controls the output level of all audio channels. This does not affect the OUT (REC) level. PHONES (SILENT CINEMA) Allows you to enjoy DSP effects when listening with headphones. w SPEAKERS A/B/OFF Selects the set of front speakers connected to the A or B terminals.

  • Page 10: Remote Control

    CONTROLS AND FUNCTIONS Remote control This section describes the controls and functions of the remote control when it is set in AMP mode. Please make sure to select AMP mode before beginning operation. See “REMOTE CONTROL FEATURES” on page 47 to operate other components with this remote control.

  • Page 11: Using The Remote Control

    r MUTE Mutes the sound. Press again to restore the audio output to the previous volume level. t 6.1/5.1 Switches on or off the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder. y STEREO Switches between normal stereo and DSP effect reproduction.

  • Page 12: Front Panel Display

    CONTROLS AND FUNCTIONS Front panel display SILENT CINEMA NIGHT MATRIX VIRTUAL DIGITAL ~~~~~~~~~~~~~~ 1 Decoder indicators When any of this unit’s decoders function, the respective indicator lights up. 2 SILENT CINEMA indicator Lights up when headphones are connected and a sound field program is selected (see page 27).

  • Page 13: Connections

    Before connecting components CAUTION Do not connect this unit or other components to the mains power until all connections between the components have been completed. • Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. Some components require different connection methods and have different jack names.

  • Page 14: Connecting Video Components

    CONNECTIONS Connecting video components I Connecting a video monitor Connect the video input jack on your video monitor to the MONITOR OUT VIDEO jack. I Connecting a DVD player/digital TV/cable Connect the optical digital audio signal output jack on your component to the DIGITAL INPUT jack and connect the video signal output jack on the component to the VIDEO jack on this unit.
  • Page 15 I COMPONENT VIDEO jacks You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using COMPONENT VIDEO connections. COMPONENT VIDEO MONITOR /CBL Note • If you connect your video monitor to this unit using a COMPONENT VIDEO connection, connect your video source components such as a DVD player or digital TV to this unit using the VIDEO COMPONENT connections.

  • Page 16: Connecting Audio Components

    CONNECTIONS Connecting audio components I Connecting a CD player Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack on this unit. • Use the AUDIO jacks on this unit to connect to a CD player that does not have a COAXIAL DIGITAL OUTPUT jack, or to record from CD players.

  • Page 17: Connecting The Antennas

    • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. CONNECTIONS...

  • Page 18: Connecting An External Decoder

    CONNECTIONS Connecting an external decoder This unit is equipped with 6 additional input jacks (FRONT left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/Super Audio CD player.

  • Page 19: Connecting The Speakers

    1.8 m (6 ft) above the floor. Subwoofer The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels,...

  • Page 20: Speaker Connections

    CONNECTIONS I Speaker connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

  • Page 21: Speaker Layout

    A center speaker can be connected to these terminals. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the front, center and/or surround channels to this jack in accordance with your SPEAKER SET selections.

  • Page 22: Connecting The Power Supply Cord

    CONNECTIONS Connecting the power supply cord VOLTAGE SELECTOR VOLTAGE SELECTOR 110V-120V URROUND) 220V-240V (Asia and General models) I Connecting the AC power cord Plug the power cord into an AC wall outlet. I VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.

  • Page 23: Impedance Selector Switch

    ■ IMPEDANCE SELECTOR switch (U.S.A. and Canada models only) CAUTION Do not change the setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may damage the unit. If this unit fails to turn on when STANDBY/ON is pressed on either the front panel or remote control, the IMPEDANCE SELECTOR switch may not be fully slid to either position.

  • Page 24: Turning On The Power

    CONNECTIONS Turning on the power When all connections are complete, turn on the power of this unit. STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM PHONES SPEAKERS STEREO PROGRAM INPUT A/B/OFF INPUT MODE EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA SYSTEM...

  • Page 25: Basic System Settings

    BASIC SYSTEM SETTINGS The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the “SOUND”...

  • Page 26: Set Menu

    BASIC SYSTEM SETTINGS ■ Basic menu operation sequence SET MENU BASIC SOUND 1 SETUP Press j / i to alter the settings for each parameter. Use d to move to the next setting. 1 ROOM Choose from S/M/L. 2 SUBWOOFER Choose either of YES/NONE.

  • Page 27: Setting The Unit To Match Your Speaker System

    Setting the unit to match your speaker system Follow the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting.

  • Page 28: Playback

    STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM SPEAKERS STEREO PROGRAM INPUT PHONES A/B/OFF INPUT MODE EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA SYSTEM POWER POWER POWER STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX 6CH INPUT AUDIO DISC SKIP CODE SET VOLUME...

  • Page 29: Playing Video Sources In The Background

    Select a sound field program if desired. Press PROGRAM l / h (or press AMP to select the AMP mode, then press one of the field program buttons repeatedly on the remote control). See pages 30 - 37 for details about sound field programs.

  • Page 30: Input Modes And Indications

    PLAYBACK Input modes and indications This unit is equipped with 2 types of input jacks. Do the following to select the type of input signals you want to use. Press INPUT MODE repeatedly until the desired input mode is shown on the front panel display.

  • Page 31: Selecting A Sound Field Program

    Selecting a sound field program You can enhance your listening experience by selecting sound field programs. For details about each program, see pages 30 – 33. STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM PHONES SPEAKERS STEREO PROGRAM INPUT...
  • Page 32 PLAYBACK ■ Selecting PRO LOGIC or PRO LOGIC II You can listen to 2-channel sources decoded into four discrete channels by selecting PRO LOGIC or five discrete channels by selecting PRO LOGIC II in program No. 9 (refer to the list on page 32). VOLUME –...

  • Page 33: Virtual Cinema Dsp

    I Virtual CINEMA DSP With Virtual CINEMA DSP, you can enjoy all sound field programs without surround speakers. It creates virtual speakers to reproduce a natural sound field. You can listen to virtual CINEMA DSP by setting “1C SURR” in the set menu to NON. Sound field processing changes to Virtual CINEMA DSP automatically.

  • Page 34: Digital Sound Field Processing (Dsp)

    The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources and fully encompass the listener.

  • Page 35: Cinema Dsp

    It recreates comprehensive movie sound design in your audio room. In CINEMA DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Front left and right, and Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources, and a surround sound field that goes beyond the screen.
  • Page 36 CINEMA DSP I For movie programs Program MOVIE Spectacle THEATER 1 Sci-Fi MOVIE Adventure THEATER 2 General Straight Decode Enhanced Mode Straight Decode This unit is equipped with various precise decoders; • Dolby Digital/DTS decoder for multi-channel reproduction of the original sound •...

  • Page 37: Sound Field Effects

    Dolby Pro Logic II decodes Dolby Surround software into 5 discrete full-range channels (3 channels in front and 2 channels in surround). There are 2 modes; MOVIE for movies and MUSIC for 2-channel audio sources. These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround, and right surround channels.

  • Page 38: Tuning

    There are 2 methods of tuning; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. ■ Automatic tuning STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM SPEAKERS STEREO PROGRAM INPUT PHONES...

  • Page 39: Presetting Stations

    Presetting stations I Automatically presetting FM stations You can use the automatic preset tuning feature to store FM stations. This function enables the unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations in 5 groups, A1 through E8) of those stations in order.
  • Page 40 TUNING I Manually presetting stations You can store up to 40 stations (8 stations x 5 groups) manually. STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM SPEAKERS STEREO PROGRAM INPUT PHONES A/B/OFF INPUT MODE EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA Tune in to a station.

  • Page 41: Selecting Preset Stations

    Selecting preset stations You can tune any desired station simply by selecting the preset station number under which it was stored. STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM PHONES SPEAKERS STEREO PROGRAM INPUT A/B/OFF INPUT MODE EFFECT TONE CONTROL BASS/TREBLE...

  • Page 42: Sleep Timer

    Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer can only be set with the remote control. •...

  • Page 43: Recording

    Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation . STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY EDIT NEXT SET MENU MAN'L/AUTO FM PHONES SPEAKERS STEREO PROGRAM INPUT A/B/OFF...

  • Page 44: Set Menu

    You can set the following parameters on the set menu to obtain a better sound from the unit. Change the settings to reflect the needs of your listening environment. Set menu list The set menus are divided by use and function into the 4 categories listed here.

  • Page 45: Sound 1 Speaker Set

    Press j / i once to enter the setup mode of the selected item. The last setting you adjusted appears on the front panel display. Depending on the menu item, press u/d to select a sub item. Press j / i repeatedly to change the menu item setting.
  • Page 46 SET MENU ■ 1B FRONT (front speaker mode) Choices: LRG (large), SML (small) Select this if you have large front speakers. The unit directs the entire range of the front left and right channel signals to the front left and right speakers. Select this if you have small front speakers.

  • Page 47: Sound 2 Sp Distance (Speaker Distance)

    SOUND 2 SP DISTANCE (speaker distance) Use this feature to manually input the distance of each speaker and adjust the delay applied to respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations.

  • Page 48: Sound 5 Center Geq (Center Graphic Equalizer)

    SET MENU SOUND 5 CENTER GEQ (center graphic equalizer) Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right front speakers. You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies. Control range (dB): –6 to +6 Initial setting: 0 dB for 5-band Press d to select a higher frequency and u...

  • Page 49: Option 1 Display Set

    OPTION 1 DISPLAY SET I DIMMER Use this to adjust the brightness of the front panel display. Control range: –4 to 0 OPTION 2 MEM. GUARD (memory guard) Use this feature to prevent accidental changes to sound field program parameter values and other system settings. Choices: ON, OFF Select ON to protect: •...

  • Page 50: Advanced Setup Menu

    The ADVANCED SETUP menu is displayed in the front panel display. • During the advanced setup procedure, audio output is muted. • During the advanced setup procedure, only the STANDBY/ ON, STRAIGHT (EFFECT) and PROGRAM l / h buttons on the front panel are available for operation. STANDBY PRESET/TUNING FM/AM...

  • Page 51: Remote Control Features

    REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and other manufacturers. To control other components, you must set up remote control with the appropriate remote control codes.

  • Page 52: Setting Remote Control Codes

    – V-AUX – – You can control this unit and other Yamaha tuners only. You can only set TV remote control codes for the D-TV/CBL buttons. Press and hold CODE SET. With CODE SET depressed, press an input selector button to select the component you want to set up.

  • Page 53: Controlling Other Components

    Controlling other components Once you set the appropriate remote control codes, you can use this remote to control your other components. Note that some buttons may not correctly operate the selected component. Use the input selector buttons to select the component you want to operate. The remote control automatically switches to the appropriate control mode for that component.

  • Page 54: Setting The Speaker Levels

    SETTING THE SPEAKER LEVELS Adjusting the speaker levels during playback You can adjust the output level of each speaker while listening to sound playback. VOLUME – – – MUTE INPUT MUTE HALL JAZZ ROCK ENTERTAINMENT MUSIC TV THTR MOVIE1 MOVIE2 /DTS NIGHT 6.1/5.1...

  • Page 55: Editing Sound Field Parameters

    EDITING SOUND FIELD PARAMETERS Changing parameter settings The initial sound field program settings will provide you with an excellent listening experience as they are. But you can create an original listening environment by altering some settings. Note • The editable parameters vary depending on the sound field program you select.

  • Page 56: Sound Field Parameter Descriptions

    EDITING SOUND FIELD PARAMETERS Sound field parameter descriptions You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. I DSP LEVEL Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.

  • Page 57: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General...
  • Page 58 TROUBLESHOOTING Problem No sound from the The output level of the center speaker is center speaker. set to minimum. “SOUND 1A CENTER” on the set menu is set to NONE. One of the HiFi DSP programs (1 to 4) has been selected (except for 5ch Stereo). The source encoded with a Dolby Digital or DTS signal does not have a center channel signal.
  • Page 59 Problem There is noise interfer- This unit is too close to the digital or high- ence from digital or frequency equipment. radio frequency equipment, or this unit. The unit suddenly turns The internal temperature has become too into standby mode. high and the overheat protection circuitry has been activated.
  • Page 60 TROUBLESHOOTING I Remote control Problem The remote control does Wrong distance or angle. not work nor function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The remote control code has not correctly set.

  • Page 61: Resetting The Factory Presets

    RESETTING THE FACTORY PRESETS If you want to reset all of your unit's parameters for any reason, do the following. This procedure completely resets ALL parameters, including the SET MENU, level, assign, and tuner presets. Be sure this unit is in standby mode. STANDBY PRESET/TUNING FM/AM...

  • Page 62: Glossary

    Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home.
  • Page 63 ■ SILENT CINEMA YAMAHA has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed using headphones.

  • Page 64: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround 1 kHz, 0.9% THD, 6 Ω/8 Ω ... 110 W • DIN Standard Output Power [Europe model] 1 kHz, 0.7% THD, 4 Ω ... 105 W • Maximum Power [China, Korea and General models] 1 kHz, 10% THD, 6 Ω...

  • Page 65: List Of Remote Control Codes

    297 225 Telefunken 269 264 265 266 Thomson 223 266 Toshiba 292 226 267 215 Videch 297 242 Wards 297 239 232 Yamaha 299 292 Admiral Aiwa 396 397 398 329 Akai 322 323 324 Audio Dynamic 392 394 Bell&Howell Blaupunkt...
  • Page 66 325 328 Telefunken 376 377 Thorn 393 396 Toshiba 335 369 389 Universum 396 327 376 W.WHouse Wards 395 396 336 362 Yamaha 399 392 393 394 DVD player Denon 623 624 Funai Hitachi Kenwood Mitsubishi Onkyo 632 633 634 Panasonic...
  • Page 67 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

Table of Contents