NETGEAR Nighthawk SX10 Pro Gaming User Manual page 33

Advanced 8-port gigabit ethernet switch with 2-ports 10-gigabit/multi-gigabit ethernet
Table of Contents

Advertisement

Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
over a period that you can select, from 5 minutes, 30 minutes, 1 hour, to 10 hours. By
default, traffic for all ports is displayed, but you can manually exclude ports from the
graphs.
While monitoring, with two clicks, you can optimize the gaming settings by assigning
the highest priority to an individual port or blocking an individual port.
To monitor the gaming traffic and optimize the gaming settings:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select GAMING.
The page shows the TRANSMIT - TIMELINE, RECEIVE - TIMELINE, and DEVICES
panes.
The TRANSMIT - TIMELINE pane displays a graph that shows the amount of
transmitted (Tx) traffic and achieved traffic speed in Mbps over a period. This traffic
is also referred to as outgoing, egress, or uploaded traffic.
The RECEIVE - TIMELINE pane displays a graph that shows the amount of received
(Rx) traffic and achieved traffic speed in Mbps over a period. This traffic is also referred
to as incoming, ingress, or downloaded traffic.
Note: For information about the options in the DEVICES pane, see Set Rate Limits
for a Port on page 42 and Set the Priority for a Port on page 43.
5. To change the period over which traffic is shown, select the Interval 5m (5 minutes),
30m (30 minutes), 1h (1 hour), or 10h (10 hours) radio button above the graph.
6. To exclude an individual port from a graph, below the Time (seconds) bar of the
graph, click the rectangular block for an individual port.
The port number next to the block is crossed out and the traffic information for the
port is exluded from the graph.
Optimize the Switch
Performance
33
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nighthawk gs810emx

Table of Contents