Table of Contents
Advertisement
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
Delete an Advanced Port-Based VLAN
You can delete an advanced port-based VLAN that you no longer need. You cannot
delete the default VLAN.
Note: If you deactivate the basic or advanced port-based VLAN mode, all port-based
VLANs are deleted.
To delete an advanced port-based VLAN:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
6. In the Advanced Port-Based VLAN section, click the VLAN that you want to delete
(you can click anywhere in the row for the VLAN).
7. Click the DELETE button.
Your settings are saved. The VLAN is deleted.
Manage Basic 802.1Q VLANs
In a basic 802.1Q VLAN configuration, VLAN 1 is added to the switch and all ports
(1 through 10) function in access mode as members of VLAN 1. You can change the
mode for a port to trunk mode, you can add more VLANs, and you can assign a different
VLAN to a port.
After you activate the Basic 802.1Q VLAN mode, you can create VLANs, assign the
VLANs to ports that function in access mode, and assign the trunk mode, which carries
traffic for all VLANs.
Use VLANS for Traffic
Segmentation
56
User Manual
Advertisement
Table of Contents
