Table of Contents
Advertisement
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
that you set for outgoing traffic on that port. You can select each rate limit as a predefined
data transfer threshold from 1 Mbit/s to 500 Mbit/s.
Note: If the QoS mode on the switch is Port-Based, we recommend that you first save
your current QoS settings as a custom preset mode before you change the QoS mode
to the 802.1P/DSCP QoS mode. For more information, see Save Your Quality of Service
Settings as a Custom Preset Mode on page 34.
To use 802.1P/DSCP QoS mode and set the rate limits for ports:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. If the selection from the QoS Mode menu is Port-Based, do the following to change
the selection to 802.1P/DSCP:
a. From the QoS Mode menu, select 802.1P/DSCP.
A pop-up warning window opens.
b. Click the CONTINUE button.
The pop-up window closes.
Note: For information about broadcast filtering, see Manage Broadcast Filtering
and Set Port Storm Control Rate Limits on page 41.
6. To set rate limits, do the following:
a. Click the RATE LIMITS tab.
b. Click the purple pencil icon.
The rate limit settings become available.
c. For each port for which you want to set rate limits, select the rate in Mbit/s from
the individual Ingress and Egress menus for the port.
The default selection is No Limit.
d. Click the APPLY button.
Optimize the Switch
Performance
40
User Manual
Advertisement
Table of Contents
