Rename A Custom Preset Mode; Delete A Custom Preset Mode - NETGEAR Nighthawk SX10 Pro Gaming User Manual

Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
6. Click the APPLY button.
Your settings are saved.

Rename a Custom Preset Mode

After you save a custom preset mode, you can rename the mode.
To rename a custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Click the SAVE tab.
6. Select the Slot 1 or 2 button.
7. In the Preset Mode Name field, enter a new name from 1 to 16 characters for the
custom preset mode.
8. Click the RENAME button.
Your settings are saved.

Delete a Custom Preset Mode

You can delete a custom preset mode that you no longer need. You cannot delete the
default Standard Preset mode.
To delete a custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
Optimize the Switch
Performance
36 User Manual