Recording Samples, And Creating Songs; Sample Recording Overview; Connecting The Input Source; Entering Rec Mode And Selecting The Pad - Yamaha SU10 Owner's Manual

7
This chapter explains how to record samples and how to create songs.
(Explanation of song creation begins on page 35.)

Sample Recording Overview

To record a sample, you must (1) connect up the input source, (2) enter REC mode
and select the destination pad, (3) set the recording parameters, (4) start the re-
cording, and (5) stop the recording. Each of these steps will be described in turn.

Connecting the Input Source

Connect a line input to the LINE IN jack, or a microphone to the MIC INPUT.
Entering REC Mode and Selecting
the Pad
1. Check that the SU10 is in PLAY mode, then press [REC] to enter RECORDING
mode. The LCD displays the REC indicator and prompts you to select the pad
to be recorded. The LCD's meter area indicates the available recording time.
Available recording time depends on (a) the amount of memory already used by other pads, and
(b) the current settings for the Grade, Pitch, and Format recording parameters.
Once you have entered RECORDING mode, you can return to PLAY mode at any time by
pressing [EXIT].
Recording Samples,
and Creating Songs
Remaining recording time

Recording Samples, and Creating Songs

31