Split [Spltto ?] - Yamaha SU10 Owner's Manual

If you do not wish to execute the move, press [>] or [<] to change to a different edit function, or
else press [EXIT] to return to PLAY mode.
2. Press [ENTER]. The LCD displays a confirmation Prompt.
3. Press [ENTER] to execute the move. If the move is possible, the SU10 begins
execution and displays the Keep PwrOn message.
Do not switch off power while this message is on the screen.
If your destination pad is in a locked bank, the LCD briefly displays the Locked Bank!
message, then waits for you to select another destination.
If the destination pad is already occupied, the LCD briefly displays the Cannot Move! mes-
sage, then waits for another selection.
4.
When execution is completed, the LCD displays the Complete message,
then asks whether to begin editing of the destination pad. You can now ( a )
press [ENTER] to start editing of the destination pad; ( b ) select a different pad
for editing; or ( c ) press [EXIT] to return to PLAY mode.
SPLIT [SpltTo
Purpose
You use this function to split the sample you are editing into two parts. The split is
executed at the sample's End Point. The initial portion of the wave content (from
wave start to End Point) remains in the original pad, while the final area (from End
Point to wave end) moves into the destination pad. This function is useful for
dividing up a long pad, or for breaking a pad into two or more pieces so that you
can play the pieces together.
50
Editing
Mov x x
y y ?
Pad
Original
StPnt EdPnt
Sample
Pad
Destination
? ]
Execute
Pad
StPnt EdPnt
Sample
Pad
Sample