Delete [Delete ?] - Yamaha SU10 Owner's Manual

You may notice that the Start Point (or Loop Point) value may not return to exactly 0 following
compacting, but may be as high as 1 (for a stereo sample) or 3 (for a monaural sample). In the
same way, the End Point may be 1 to 3 units ahead of the actual wave end. This is because the
SU10 can only delete data in 2-unit (if stereo) or 4-unit (if monaural) segments.
DELETE [Delete
Purpose
This procedure deletes the entire sample from memory. Recordable memory space
increases, and the emptied pad becomes free to accept new data.
Procedure
1.
When you enter this function, the LCD displays the following message, where
xx identifies the currently selected pad.
Delete
x x ?
2.
Press [ENTER]. The LCD displays a confirmation query.
Del xx
Sure?
3. To execute, press [ENTER] again.
If you do not want to execute deletion, press [EXIT] instead. The SU10 returns to Step 1 above.
4.
The SU10 begins execution and displays the Keep PwrOn message. Do not
switch off power while this message is on the screen. When execution is
finished, the LCD briefly displays the Complete message, then returns the
Which Pad? prompt.
5. Select another pad for editing, or else press [EXIT] to return to PLAY mode.
?]
Execute
Pad
Sample
Pad
Editing
53