Yamaha SU10 Owner's Manual page 30

Viewing/Changing the filter and resonance settings
1.
Set the SU10 to filter-play operation as described above, then press
[SHIFT]+[EDIT]. The LCD indicates the currently selected filter type.
2. If you wish to change the filter type, press [-1] or [+1] as necessary. Available
types are LPF, BPF, and HPF. (See the FILTER SETTINGS box on the next page.)
3.
If you wish to view or change the resonance setting, press [>] to move to the
resonance-select function. The LCD indicates the current resonance.
Press [-1] or [+1] to change the value as necessary. Available values are Flat,
Weak, and Strng (strong). (See FILTER SETTINGS box.)
4.
Try playing some samples and working the ribbon to see how your new set-
tings sound. When you are satisfied with the settings, press [EXIT] once to
terminate filter setup and return to the regular filter-play level. Or else press
[EXIT] twice to return to normal PLAY mode.
• FILTER play is available only when the sampling grade is set to LONG or EXLG. If you try to
select this feature while the grade is HI or STD, the SU10 briefly displays the Change Grd!
message, then resumes normal PLAY mode. For information about sampling grades and how
to change them, see page 55.
• Changing the filter type or switching the resonance to "Strong" may sometimes cause output to
exceed the clipping level. If sound is distorted, press [-1] to reduce the volume.
23
Playback