Yamaha RM1x Owner's Manual page 75

Out Channel
You use the TO TG setting to set the track's output channel to the tone generator block.
You use the MIDI OUT settings to assign each track to a MIDI OUT channel.
The RM1x stores separate channel arrangements for each style. The assignments automatically change each time you switch to
a different style.
Parameter
TO TG channel setup
MIDI OUT channel setup
Track number
* For information about how to change values, refer to the Basic Operation (page26).
Values
OFF, 01 ... 16
OFF, 01 ... 16
01 ... 16
Track number
Function
Sets up channel transmission to the tone generator block.
When set to OFF, track data is not sent to TG block.
Sets up channel transmission to the MIDI OUT connector.
When set to OFF, RM1x does not send data to MIDI OUT.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
10. Setup
75
RM1x SEQUENCE REMIXER