Yamaha RM1x Owner's Manual page 113

Undo/Redo
Job 00 Undo/Redo
Exactly the same as in the PATTERN mode (page 82).
Event
Job 01 Copy Event
1
2
This job copies all data from a specified source area (pattern
chain ) to a specified destination, overwriting any data al-
ready existing at the destination.
1. Source segment
The upper "M" values set the segment from which data
are copied.
Settings : Measure
2. Start point of destination segment
The lower "M" value sets the start point for the copy on
the destination phrase.
Settings : Measure
3. Times
This multiplier specifies the number of times the seg-
ment is copied.
Settings : 01 ... 99
Job 02 Erase Event
1
This job clears all data from the specified segment of the des-
ignated pattern chain, so that the segment becomes silent.
1. Segment (M001 ~ M999)
Sets the area of the pattern chain to be erased.
Settings : Measure
3
001 ... 999
001 ... 999
001 ... 999
Measure
Job 03 Create Measure
1
This job inserts one or more empty measures into the same
location on all tracks.
1. Insertion point
The "M" value sets the position for the insertion. Spe-
cifically, the value sets the measure number (within the
pattern chain) for the first inserted measure. A value of
001, for example, inserts the measures at the very be-
ginning (so that the first inserted measure becomes
Measure 1).
Settings : 001 ... 999
2. Time signature
You can select any time signature that you like. You
may find it convenient to use this parameter when you
need to create a pattern that incorporates meter changes.
Settings : 1/16 ... 16/16; 1/8 ... 16/8; 1/4 ... 8/4
3. Number of measures to insert
You can set the number of measures to be inserted.
Settings : 01 ... 99
Job 04 Delete Measure
1
This job removes a segment consisting of one or more meas-
ures. The segment is removed from all tracks.
The area that trails the deleted segment shifts forward (to-
ward the start of the pattern chain) to fill in the gap.
1. Range
The "M" values set the segment to be removed. The
first value gives the number of the first measure of the
segment; the second value gives the number of the final
measure.
Settings : 001 ... 999
3. Job
2
3
113
RM1x SEQUENCE REMIXER