Knob Assign - Yamaha RM1x Owner's Manual

Sequence remixer
Hide thumbs Also See for RM1x:
Table of Contents

Advertisement

10. Setup

Knob Assign

This function makes it possible to assign different parameters to the RM1x's 8 realtime controller knobs (see page 29 for more
on the controller knobs).
Parameter
Template
Knob number
Parameter
Track
* For information about how to change values, refer to the Basic Operation (page26).
74
RM1x SEQUENCE REMIXER
Values
DEFLT, VOLUME, PAN,
REVERB, CHORUS, VARI.,
A1 ... A8, B1 ... B8
DEFLT, CC007, CC010, CC091,
CC093, CC094
(CC001 ... CC030, CC032 ...
CC119)
AUTO, 01 ... 16
Function
This parameter provides a selection of preset knob assignments,
including the RM1x's default assignments (more below). The "DEFLT"
setting recalls the RM1x's default knob assignments (correspond-
ing to the assignments labeled on the panel). The "VOLUME" tem-
plate assigns each knob to control volume on the corresponding
track — the "A" group controls tracks 1 through 8, and the "B" group
controls tracks 9 through 16. The "PAN," "REVERB," "CHORUS," and
"VARI." templates assign the knobs to control pan, reverb send level,
chorus send level, and variation effect send level, respectively, on
the corresponding tracks in the same way.
Selects a knob for assignment. The "A" group assignments (A1 ...
A8) are selected when the [KNOB] button indicator is lit, and the "B"
group assignments (B1 ... B8) are selected when the [KNOB] but-
ton indicator is out.
Specifies the parameter to be assigned to the currently selected
knob. "DEFLT" is the default paremeter. "CC007" is master volume.
"CC010" is pan. "CC091" is reverb send level. "CC093" is chorus
send level. "CC094" is variation effect send level. Please note that
the values do not change continuously when using display knob 3.
Parameters can be selected in 1-step increments from CC001 to
CC119 by placing the cursor at the PARAMETER and using the
[NO -1]/[YES +1] buttons.
Specifies the track to which control will be applied by the currently
selected controller knob. When "AUTO" is selected control will be
applied to the track selected in the PATTERN or SONG playback
mode.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents