Yamaha RM1x Owner's Manual page 70

9. Effect
Variation Edit
page1
When variation connection = System:
Parameter
(Available parameters
vary according to the
type.)
* For information about how to change values, refer to the Basic Operation (page26).
page2
When variation connection = System:
Parameter
(Available parameters vary
according to the type.)
Send Variation to Chorus
Dry/wet balance
Send Variation to Reverb
Variation Pan
* For information about how to change values, refer to the Basic Operation (page26).
70
RM1x SEQUENCE REMIXER
Values
(Refer to the separate List Book. ) Refer to the separate List Book for a complete listing of the RM1x
Values
(Refer to the separate List Book. ) Refer to the separate List Book for a complete listing of the RM1x
000 ... 127
D63>W ... D=W ... D<W63
000 ... 127
L63 ... C ... R63
When variation connection = Insertion:
Function
effect parameters.
When variation connection = Insertion:
Function
effect parameters.
Sets level on bus from variation effect block to chorus block.
Setting appears only if variation type is set to System.
Sets balance between wet sound (sound passed through variation
effect) and dry (non-effected) sound.
Setting appears only if variation type is set to Insertion.
Sets level on bus from variation effect block to reverb block.
Setting appears only if variation type is set to System.
Sets stereo positioning of signal from variation effect block.
Setting appears only if variation type is set to System.