Step Recording - Yamaha RM1x Owner's Manual

2. Recording

Step Recording

You use this recording mode to create a recording one note at a time, setting appropriate values for each note's length, velocity,
and so on.
Time signature
Time signature
Time signature
Parameter
Pointer
Step
Keypad velocity
Value
Gate time
Rest
Tie
Delete
BkDelete
Track number
Event type
Time Signature
* For information about how to change values, refer to the Basic Operation (page26).
52
RM1x SEQUENCE REMIXER
When EVENT TYPE = Note:
Pointer
Track number
When EVENT TYPE = PB:
Track number Pointer
When EVENT TYPE = CC:
Track number Pointer
Values
0060, 0080, 0120, 0160, 0240,
0320, 0480, 0960, 1920
001 ... 127, RND1 ... 4
-8192 ... +8191 (EVENT TYPE=PB),
000 ... 127 (EVENT TYPE=CC), PAD
001 ... 200
01 ... 16
Note, PB, CC[000] ... CC[119]
1/16 ... 16/16; 1/8 ... 16/8; 1/4 ... 8/4 Indicates the pattern's time signature.
Event type
Event type
Event type
Function
Current note position.
The "size" of the current recording step. This determines to what
position the pointer will advance after a note has been entered.
The velocity value of the note to be entered
Specifies the value for event types other than "Note." This parameter
only appears when an EVENT TYPE other than "Note" is selected.
Press the [ENTER] button to actually enter the specified value.
The length of the entered note. Used to produce legato, staccato,
and other effects.
Enters a rest of the currently selected note length at the note pointer position.
Lengthens the previously entered note by "tying" another note of
the same length and pitch to it.
Deletes the note or chord at the note pointer.
Moves the note pointer backward by the currently selected note
length and deletes the corresponding note or chord.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Specifies the type of event to be entered.