Cooper Crouse-Hinds Pro AFP Series Instruction Manual page 8

DOCUMENT 1331
REV. A
Instruction Manual
PRO AFP Series LED
Inset Runway Guard Light L-852G
A grounded ESD Wrist Strap when working on or handling fixture power supplies or LED/Heat
sink assemblies. ESD Wrist Straps, also known as anti-static Wrist Straps, are used to prevent
electrostatic discharge (ESD) by safely grounding a person working with electronic equipment or
at an electronic assembly facility. It consists of a band of fabric with fine conductive fibers
woven into it. The fibers are usually made of carbon-filled rubber, and the strap is bound with a
stainless-steel clasp or plate. They a usually used in conjunction with an ESD table mat on the
workbench, or a special static-dissipating plastic laminate on the workbench. ESD Products
brand (http://www.esdproduct.com/esd_wrist_straps.php) or equal.
A #2 x 4 inch (101.6 mm) long Phillips head screw driver for installing the Isolation
Transformer's FAA L-823 Style 8 secondary receptacle retainer plate screws into one of the
recommended base plates for a L-867 base.
Most tools indicated above can be purchased from MSC Industrial Supply Co.
(http://www.mscdirect.com/), or McMaster-Carr (http://www.mcmaster.com/).
7