Input Specifications; Output Specifications - Yamaha EMX5000-12 Owner's Manual

Dimensions (WxHxD)
Weight
Accessories
Input specifications
Gain
Input terminals
control
–60
CH INPUT A
(CH1–8/1–16)
–16
–60
CH INPUT B
(CH1–8/1–16)
–16
–34
ST INPUT
(CH9–12/17–20)
+10
ST SUB IN (1, 2)
2TR IN (L, R)
INSERT IN (CH1–8/1–16)
POWER AMP IN (A, B)
1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain.
(All fader and level controls are at maximum position.)
2. Balanced. (T=HOT, R=COLD, S=GND)
3. Unbalanced.
In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced to 1 Vrms.
Output specifications
Output terminals
ST OUT (L/R)
ST SUB OUT (L/R)
MONO OUT
AUX SEND 1, 2
EFFECT SEND 1, 2
REC OUT (L/R)
INSERT OUT (CH1–8/1–16)
PHONES (L/R)
SPEAKERS 1 (A, B)
SPEAKERS 2 (A, B)
1. Unbalanced.
2. Impedance balaned. (T=HOT, R=COLD, S=GND)
• In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced 1 Vrms.
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 70A
Conformed Environment: E1, E2, E3 and E4
682 158 538 mm (EMX5000-20) / 478
19 kg (EMX5000-20) / 15 kg (EMX5000-12)
Power cord, Owner's Manual
Actual load For use with
impedance nominal
5 k 50–600 Mics
50 k
600 Lines
10 k
Actual source For use with
impedance nominal
150 600 Lines
600 10 k Lines
100 40 Lines
0.1 4/8 Speakers
158 538 mm (EMX5000-12)
Input level
1
Nominal
Sensitivity
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV)
–36 dB (12.3 mV) –16 dB (123 mV)
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV) PHONE JACK
–36 dB (12.3 mV) –16 dB (123 mV)
–54 dB (1.55 mV) –34 dB (15.5 mV)
–10 dB (245 mV) +10 dB (2.45 V)
–12 dB (195 mV) +4 dB (1.23 V)
–26 dBV (50.1 mV) –10 dBV (316 mV)
–20 dB (77.5 mV) 0 dB (0.775 V)
–12 dB (195 mV) +4 dBV (1.23 V)
Output level
Nominal
+4 dB (1.23 V)
–10 dBV (316 mV)
0 dB (775 mV)
3 mW
100 W/4

Input specifications

Max. before clip
XLR-3-31 type
+4 dB (1.23 V)
(TRS)
+4 dB (1.23 V)
–14 dB (155 mV)
+30 dB (24.5 V)
PHONE JACK
+20 dB (7.75 V)
+10 dBV (3.16 V) PHONO JACK
+20 dB (7.75 V)
PHONE JACK
+18 dB (6.16 V)
PHONE JACK
Connectors on mixer
Max. before cliping
+20 dB (7.75 V)
PHONE JACK
+10 dBV (3.16 V)
PHONO JACK
+20 dB (7.75 V)
PHONE JACK
75 mW
PHONE JACK (TRS)
SPEAKON
500 W/4
PHONE JACK
EMX5000-20/EMX5000-12—Owner's Manual
31
Connectors on
mixer
2
2
3
3
3
3
1
1
1
2
1