The [Display Hold] Button - Yamaha Clavinova CVP-59S Owner's Manual

In many cases where
buttons can be pressed simultaneously to recall the default setting for that
parameter. The panel [+] and [–] buttons can be used in the same way.
This applies to most parameters that have a range of possible settings.
Parameters of this type are enclosed in a rounded frame in the display.
Parameters which are directly executed or simply switched on or off
via the corresponding LCD button appear in a square frame and are not
editable via the data dial and [+]/[–] buttons.

The [DISPLAY HOLD] Button

When selecting voices (page 15) or accompaniment styles (page 28),
for example, the voice or style list that appears when a VOICE or
STYLE button is pressed will automatically disappear after a few sec-
onds if no selections are made. When this type of temporary "pop-up"
display is selected, the [DISPLAY HOLD] button will flash indicating
that the display will disappear in a few seconds. Pop-up displays can be
kept on the LCD for as long as required by pressing the [DISPLAY
HOLD] button so that its indicator lights continuously. Press [DISPLAY
HOLD] a second time (the indicator will go out) to disengage the dis-
play hold function.
DISPLAY HOLD
General Operation: The Display & Related Controls
and or < and > LCD buttons appear, both
• If the [DISPLAY HOLD] button is en-
gaged when a normal display is show-
ing, no pop-up displays will appear
even when a button that normally calls
a pop-up display is pressed.
• The length of time pop-up displays
remain on the LCD can be set via the
"Pop-up Time" function described on
page 109.
9