Midi Data Format - Yamaha Clavinova CVP-59S Owner's Manual

MIDI Data Format / MIDI-Datenformat / Format des
If you're already very familiar with MIDI, or are using a computer to control your music hardware with computer-gen-
erated MIDI messages, the data provided in this section can help you to control the Clavinova.
Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Hardware-Steuerung einsetzen, werden Ihnen die
nachfolgend aufgeführten Daten bei der Steuerung des Clavinovas wahrscheinlich hilfreich sein.
Si vous vous êtes déjà familiarisés avec l'interface MIDI, ou si vous utilisez un ordinateur pour commander votre
matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous aideront à
commander le Clavinova.
Si ya está muy familiarizado con MIDI o si está usando una computadora para controlar su música con mensajes
MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la Clavinova.
• The Clavinova corresponds to a portion of the XG format, the Clavinova does not perfectly correspond to all XG
parameters.
1. Channel Messages
1.1 Key On and Key Off
Receivable note range: C-2 to G8 (true voice A-1 to C7)
Velocity range: 1 to 127 (Value accepted only at Note On)
1.2 Control Change
If the Control Change Filter in Function [MIDI 2] is set to "ON" transmission and
reception are disabled.
1.2.1 Bank Select
Cntrl# Parameter
0 Bank Select MSB
32 Bank Select LSB
A new bank selection does not become effective until receipt of the next
Program Change message.
1.2.2 Modulation
Cntrl# Parameter
1 Modulation
1.2.3 Data Entry
Cntrl# Parameter
6 Data Entry MSB
38 Data Entry LSB
Sets the value for the parameter specified by RPN/NRPN.
1.2.4 Main Volume
Cntrl# Parameter
7 Volume MSB
1.2.5 Pan
Cntrl# Parameter
10 Panpot MSB
1.2.6 Expression
Cntrl# Parameter
11 Expression MSB
1.2.7 Damper
Cntrl# Parameter
64 Damper MSB
Half pedal continuous data is received and accepted.
1.2.8 Sostenuto
Cntrl# Parameter
66 Sostenuto
1.2.9 Soft Pedal
Cntrl# Parameter
67 Soft Pedal
Half pedal continuous data is received and accepted.
124
Data Range
0:Normal, 127:Drum
0...127
Data Range
0...127
Data Range
0...127
0...127
Data Range
0...127
Data Range
0...127
0 = left; 127 = right
Data Range
0...127
Data Range
0...127
Data Range
0...127
(0-63:off, 64-127:on)
Data Range
0...127
1.2.10 Harmonic Content
Cntrl# Parameter
71 Harmonic Content
Applies adjustment to the resonance value set by the voice. This parameter
specifies relative change, with value 64 producing zero adjustment. As values
get higher the sound becomes increasingly eccentric. Note that for some voices
the effective parameter range is narrower than the legal parameter range.
1.2.11 Release Time
Cntrl# Parameter
72 Release Time
Applies adjustment to the envelope release time set by the voice.
This parameter specifies relative change, with value 64 producing zero
adjustment.
1.2.12 Attack Time
Cntrl# Parameter
73 Attack Time
Applies adjustment to the envelope attack time set by the voice.
This parameter specifies relative change, with value 64 producing zero
adjustment.
Depending on the particular voice type, Attack Time data will have little or no
affect.
1.2.13 Brightness
Cntrl# Parameter
74 Brightness
Applies adjustment to the cutoff frequency set by the voice. This parameter
specifies relative change, with value 64 producing zero adjustment. Lower
voices produce a softer sound. For some voices the effective parameter range is
narrower than the legal parameter range.
1.2.14 Portamento Control
Cntrl# Parameter
84 Portamento Control
Message should be sent with Note On already sounding. The data value sets
the portamento source key number.
The channel with change from the currently sounding pitch to the next
received Note-On key using Portamento Time of 0.
1.2.15 Effect1 Depth ( Reverb Send Level )
Cntrl# Parameter
91 Effect1 Depth
Adjusts the reverb send level.
1.2.16 Effect3 Depth ( Chorus Send Level )
Cntrl# Parameter
93 Effect3 Depth
Adjusts the chorus send level.
Data Range
0...127
(0:-64, 64:+0, 127:+63)
Data Range
0...127
(0:-64, 64:+0, 127:+63)
Data Range
0...127
(0:-64, 64:+0, 127:+63)
Data Range
0...127
(0:-64, 64:+0, 127:+63)
Data Range
0...127
Data Range
0...127
Data Range
0...127