Yamaha Clavinova CVP-59S Owner's Manual page 82

V
Select a Punch-in Mode
Use the MODE LCD button to select the 1ST KEY or PEDAL punch-
in mode.
1ST KEY Recording will begin with the first key played after the PUNCH
IN LCD button is pressed.
PEDAL Recording will begin when the left pedal is pressed after the
PUNCH IN LCD button is pressed.
B
Engage the Punch-in Record Ready Mode
Press the PUNCH IN LCD button to engage the punch-in record
ready mode — the PUNCH IN button will be highlighted.
N
Start Playback & Recording
Press the [START/STOP] or [o PAUSE] button to start playback
from the current pause location, then, if the 1ST KEY mode is selected,
begin playing at the point you want to record from. Recording will begin
as soon as you begin playing on the keyboard. If the PEDAL mode is
selected press the left pedal at the point you want to record from.
M
Stop Recording
Press the PUNCH OUT LCD button to stop recording at the point at
which you want to "punch out", leaving all data following the punch-out
point intact. Use the panel [START/STOP] button to stop recording if
you want all data following the punch-out point to be erased.
Press the [RECORD] button so that its indicator goes out, or the
[EXIT] button, to exit from the punch-in/out record mode.
.............................................................................
..................................................................
...................................................................................................
• When the PEDAL punch-in mode is
selected, the left pedal is used for this
function only (the usual pedal function
is canceled).
..........................
When the PEDAL punch-in mode is
selected:
• Recording can be started directly by
pressing the left pedal while playback
is paused (without first pressing the
[START/STOP] or [PAUSE] button).
• Recording can also be stopped by
pressing the left pedal. In this case the
data following the punch-out point will
be left active.
• If you start recording by pressing the
left pedal while playback is paused,
and stop by the [START/STOP] button,
the result will be that all the data after
the punch-in point will be erased. (If
you stop by using the PUNCH OUT
LCD button or the left pedal, only the
data between the punch-in and punch-
out points will be erased.)
• If you press the [START/STOP] button
or [ o PAUSE] button to start recording,
and the [START/STOP] button or the
PUNCH OUT LCD button to stop
recording without actually recording
anything in between, the original data
will be left untouched.
Song Recording
79