Effect Depth Control; One-Touch Preset Recall - Yamaha Clavinova CVP-59S Owner's Manual

Yamaha musical instrument owner's manual
Table of Contents

Advertisement

PHASER
Pronounced, metallic modulation with
periodic phase change.
AUTO WAH
Repeating filter sweep "wah" effect.
TOUCH WAH
Wah effect that varies filter sweep
(CVP-79A only)
according to touch.

Effect Depth Control

When a single voice is selected only one depth parameter will appear.
When the DUAL or SPLIT mode is engaged, separate depth parameters
will appear for the main and 2nd (dual) or right- and left-hand (split)
voices. The depth of the selected effect can be increased or decreased by
using the DEPTH1 ( R ) and/or DEPTH2 ( L ) LCD buttons, or the data dial
or [+]/[–] buttons when the DEPTH1 ( R ) or DEPTH2 ( L ) parameter is
highlighted. The DEPTH1 ( R ) and DEPTH2 ( L ) buttons can be held to
only increase the depth of the corresponding voice. The depth range is
from "0" (no effect) to "100" (maximum effect depth). The default
DEPTH1(R) or DEPTH2(L) setting can be instantly recalled for either
depth parameter by simultaneously pressing the [+] and [–] buttons while
the desired depth parameter is selected — DEPTH2(L) is reset to "50".

One-touch Preset Recall

Press the PRESET LCD button to instantly recall the preset effect
type and DEPTH1(R) settings for the current voice. The DEPTH2(L)
setting is not affected.
COMPRESSOR
Affects the dynamics of the sound by
(CVP-79A only)
smoothing out the high-volume
peaks and soft-volume dips.
BOOST HL
Equalizer to boost high and low
frequencies.
• The main or right-hand voice effect
type is commonly used for the 2nd or
left-hand voice.
• The depth can be adjusted in five step
intervals.
• The DEPTH1(R) and/or DEPTH2(L)
value for some effect types may be
fixed to 100 and/or 0 respectively and
cannot be changed.
+
• Each voice has its own individual
default effect on/off, type, and depth
settings. Your own settings can be
backed up via the Backup function
described on page 107.
• The DEPTH2(L) setting affects all
voices. Its default value is "50", but
your own setting can be backed up via
the Backup function described on page
107.
Voice Effects
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clavinova cvp-69aClavinova cvp-69Clavinova cvp-79a

Table of Contents