Renaming Song Files - Yamaha Clavinova CVP-59S Owner's Manual

C
Write the Changes
When all the initial data changes have been made as required, go back
to INITIAL EDIT page 1 and press the WRITE LCD button. The "Are
you sure?" confirmation display will appear. Press YES to actually
make the specified changes, or NO to abort. When this is done the
WRITE LCD button will change to UNDO, allowing you to undo the
write operation and return to the pre-edited data before making any other
edits or exiting from the Initial Edit mode.
V
Exit
....................................................................................................................................
Press the [EXIT] button, or the [RECORD] button so that its indica-
tor goes out to exit from the Initial Edit mode. If you do this after making
any edits that you have not yet written, the "Write edited data?"
confirmation prompt will appear. Press YES to write the edited data and
then exit from the Initial Edit mode, NO to exit without writing the data,
or CANCEL to return to the Initial Edit mode.

Renaming Song Files

This function lets you enter an original name for, or change the existing name of, any song file on the
disk recorded by the CVP-79A/69/69A/59S. The rename function is accessed via the RECORD [RE-
NAME] display (RECORD display page 7).
Z
Select a Song & Engage the Rename Mode
Use the SONG and
to specify the song you want to rename, then press the RENAME LCD
button to go to the NAMING display.
...........................................................................................
buttons, the data dial, or the [+]/[–] buttons
• All edited data for any number of
tracks within one song can be written
in a one-time WRITE operation.
• You can check if the results are as you
expected or not, by starting and stop-
ping playback by using the [START/
STOP] button before the UNDO opera-
tion.
........................
Song Recording
87