Yamaha Clavinova CVP-59S Owner's Manual page 89

Song Recording
X
Edit the Parameters
Three INITIAL EDIT display pages are available. Use the PAGE [<]
and [>] buttons to select the various pages and edit the parameters each
contains. It is possible to start and stop playback by using the [START/
STOP] button while editing the parameters in order to hear how the
changes affect the sound.
Page 1: INITIAL EDIT [SONG]
This page contains the REVERB TYPE and DEPTH parameters, the
TEMPO parameter, and the WRITE LCD button which is used to
actually write all initial data changes once they have been made as
required. The REVERB TYPE and DEPTH parameters and the
TEMPO parameter affect the entire song and are edited by using the
corresponding LCD buttons to select each parameter, and then the
data dial or the [+]/[–] buttons to edit (see page 22 for information on
the reverb types and depth settings, and page 29 for tempo informa-
tion).
Page 2: INITIAL EDIT [TRACK]
Page 2 includes VOICE, VOLUME, and PAN parameters that can be
set individually for each track. The VOICE parameter sets the initial
voice for the track; the VOLUME parameter sets the initial volume of
the track, and the PAN parameter sets the initial pan position of the
track. Use the TRACK
[–] buttons once the TRACK parameter has been selected — to
specify the track you want to edit, then set the parameters in this and
the following page as required.
Page 3: INITIAL EDIT [TRACK]
Page 3 contains EFFECT TYPE and DEPTH parameters and a RE-
VERB DEPTH parameter that can be set individually for each track.
The track to be edited is selected in page 2 (see above), and the pa-
rameters can be edited as required. See page 24 for information on the
available effect types and depth settings.
86
.......................................................................................
and buttons — or the data dial or the [+]/
• The data may not be played back
accurately if you use the [ r REW]
and [ f FF} buttons while editing the
initial data.
• In the Initial Edit mode the panel
buttons relating to the editable param-
eters cannot be used.
• Only the data-containing tracks will
appear and can be selected.
• The VOLUME parameter's initial
default value is "100" for every track.
This value can only be decreased.
• The effect type and depth may not be
able to be set as expected in some
cases. The other tracks are also
affected and the last set track effect
type takes priority.
• The VOICE and EFFECT TYPE
parameters cannot be edited for the
non-keyboard tracks (i.e. the
RHYTHM, ABC, and/or HARMONY
tracks).