Panasonic EtherCAT SC-GU3-03 Instruction Manual

Communication Unit for EtherCAT SC-GU3-03
In case of using devices for personnel protection, use products which meet laws
SC-GU3-03
1 OUTLINE
Communication unit SC-GU3-03
cascading connector unit SC-71
SC-GU3-03
or LS-400
SC-GU3-EU, settings and control of the connected optically commu-
FX-500 series or LS-500
End unit SC-GU3-EU
End plate MS-DIN-E
2 FUNCTIONAL DESCRIPTION
Communication unit for EtherCAT SC-GU3-03
connector
power supply
End unit SC-GU3-EU
Designation
Operation mode setting
Memory function indicator
8
INSTRUCTION MANUAL
WARNING
FX-300 series
FX-500 series or LS-500
End plate MS-DIN-E
Cascading connector unit
SC-71
SC-GU3-03
Station alias
Station alias
Function
Setting direction of switch
Occupied memory
DIP switch Operation mode
I/O mode
Full mode
6 ERROR INDICATOR
Designation
Connector for power supply
-
Parallel output connector
-
cation
3 MOUNTING AND CONNECTION
How to mount
1. Fit the rear part of the mounting section of the
2. Press down the rear part of the mounting sec-
How to remove
1.
2.
How to connect
When the units are mounted in cascade, mount the end plates MS-DIN-E
FX-500 series or LS-500 series,
1. Mount communication unit
SC-GU3-03
When mounting, remove the end con-
nector cap which is attached to the con-
2. Mount cascading connector unit SC-71
3.
4. In case using end unit SC-GU3-EU
SC-GU3-EU
removed in the step 1 to the connector
5. Mount the end plates MS-DIN-E
6. Tighten the screws of MS-DIN-E to fix
Function
CN-M20-C2
or
<Recommended product>
8
[Molex, LLC]
Description
Open
8 Open
Signal 8
SC-GU3-EU
2. Press down
2. Lift up
Cascading connector unit SC-71
SC-GU3-03
Communication unit for
SC-GU3-03
SC-71
Slide
Cascading connector unit SC-71
-
End unit SC-GU3-EU
-
-
End plate MS-DIN-E
End plate MS-DIN-E
"
Description
-
1. Fit
1. Push forward
-
-
Slide
End
connector
cap
End connector cap
Slide