Transmit Test Menu Item; Leave Menu Menu Item - Honeywell SC Series Installation Instructions Manual

Signal Conditioning, Self Calibrating Digital Indicators
008-0608-00
Rev. G,

7.4.6 TRANSMIT TEST Menu Item

When this menu item is selected, the instrument immediately
transmits the message "ADDRESS nn TEST" where "nn" is the two-
character address of the instrument. Then the message "MESSAGE
SENT" is shown on the display. This helps detect wiring or other
problems with serial communications from the instrument to the
computer or PLC.

7.4.7 LEAVE MENU Menu Item

When the menu item is displayed, press [ENTER] to leave this
menu. Press [EXIT] to return to the RUN mode.
22 Honeywell Sensing and Control