Moving Through Setup Menus; Exiting The Setup Menu Mode; Table 3-1: Navigating The Menus - Honeywell SC Series Installation Instructions Manual

Signal Conditioning, Self Calibrating Digital Indicators
3.5.3 Moving Through SETUP Menus and
Menu Items
The following table shows how to move though menus and menu
items, and how to display or change the setting of a particular
item.

Table 3-1: Navigating the Menus

Button Action
[UP] or Scroll through available menus, sub-menus or
[DOWN] menu items
[ENTER] Select a menu, sub-menu or menu item
[EXIT] If changing a setting: abandons changes to a
menu item otherwise: leaves the SETUP mode
To change the setting of a menu item:
• Press [ENTER] to display the current setting, which is pre-
ceded by the '*' character. Press [UP] or [DOWN] until you
see the setting you want. To abandon changes, press [EXIT].
To accept the new setting and move to the next item, press
[ENTER].

3.5.4 Exiting the SETUP Menu mode

To leave SETUP mode and return to the RUN mode, press [EXIT]
at any time.
8 Honeywell Sensing and Control
008-0608-00
Rev. G,