TURN SIGNAL LIGHT
To replace the turn signal light bulb,
follow these directions.
1 . Remove the screw and take off
the lens.
2. Push in on the bulb, twisting it to
the left, and pull it out.
3. To fit the replacement bulb, push it
in and twist it to the right while
pushing.
CAUTION
Overtightening the screws when
reinstalling the lens may cause
the lens to crack.
Tighten the screws only until they
are snug.
LICENSE PLATE LIGHT
To replace the license plate light bulb,
follow the procedure steps:
1. Remove the nuts
CD.
2. Remove the spacers@.
/
4. Push in on the bulb, twisting it to
the left, and pull it out.
5. To fit the replacement bulb, push it
in and twist it to the right while
pushing.
HEADLIGHT BEAM ADJUSTMENT
The headlight beam can be adjusted
both horizontally and vertically if nec-
essary.
GSF1250
To adjust the beam horizontally:
Turn the adjuster
CD
clockwise or
counterclockwise.
3. Remove the screws @ and take
off the cover with the lens @.
6-42
To adjust the beam vertically:
Turn the adjuster (2) clockwise or
counterclockwise.
6-43