GSF1250S
Low beam bulb
High beam bulb
Position light
1. Remove the two bolts
G).
Discon-
nect the coupler and remove the
instrument panel.
2. Disconnect the socket (2) and
remove the rubber cap @.
Remove the headlight high beam bulb
in the same way from under the cowl-
ing.
1. Pull out the socket.
2. Pull off the bulb from the socket.
CAUTION
Oil from your skin may damage
the headlight bulb or shorten its
life.
Grasp the new bulb with a clean
cloth.
3. Unhook the bulb holder spring @,
and pull out the bulb @.
BRAKE LIGHT/fAILLIGHT
To change the brake lighVtaillight
bulb, perform the following steps:
1. Remove the seat and tool set.
2. Turn the socket counterclockwise
and remove it.
3. Push in on the bulb, twisting it to
the left, and pull it out.
4. To tit the replacement bulb, push it
in and twist it to the right while
pushing.
6-40
6-41