Turn Signal Indicator Light; Oil Pressure Indicator Light; Coolant Temperature Indicator Light; High Beam Indicator Light - Suzuki GSF1250 Owner's Manual

TURN SIGNAL INDICATOR LIGHT
"<=:Jc:::>"
(!)
When the turn signals are being oper-
ated either to the right or to the left,
the indicator will flash at the same
time.
NOTE:
If
a turn signal light is not
operating properly due to bulb fila-
ment or circuit failure, the indicator
light flickers more quickly to notify the
rider of the existence of a trouble.
NEUTRAL INDICATOR LIGHT "N"
@)
The green light will come on when the
transmission is in neutral. The light
will go out when you shift into any
gear other than neutral.
OIL PRESSURE
INDICATOR LIGHT
"'er."
@
This indicator comes on when the
engine oil pressure is below the nor-
mal operatinq range. This should
come on when the ignition switch is
"ON" and the engine is not running.
As soon as the engine starts, this
indicator should go out.
CAUTION
Riding the motorcycle with the oil
pressure indicator light lit can
damage the engine and transmis-
sion.
Whenever the oil pressure indica-
tor lights up, indicating low oil
pressure, stop the engine immedi-
ately. Check the oil level and
determine if the proper amount of
oil is in the engine. If the light still
does not go out, have your autho-
rized
SUZUKI
dealer or a qualified
mechanic troubleshoot your
motorcycle.
2-12
COOLANT TEMPERATURE
INDICATOR LIGHT
"-f-"@
his indicator comes on when the
oolant temperature is too high.
CAUTION
Running the engine with
high
engine coolant temperature can
cause serious engine damage. If
the engine coolant temperature
Indicator light comes on, stop the
engine to let it cool.
Do not run the engine until the
coolant temperature indicator
llght goes out.
HIGH BEAM INDICATOR LIGHT
"~D"@
The blue indicator light will be lit when
the headlight high beam is turned on.
2-13